I succeeded in the IMS registering!

I submitted both op and opc values in the fhoss, UE was able to send the digest 
auth response!

Thank you for your help!

-----Original Message-----
From: "오택경" <o...@kaist.ac.kr>
To: "Yuriy Gorlichenko" <ovoshl...@gmail.com>;
Cc: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>;
Sent: 2021-08-25 (수) 01:04:07 (UTC+09:00)
Subject: Re: [SR-Users] [VoLTE] 401 unauthorized error

I tried to use all of the algorithms which fhoss can support, but they did not 
work.

Fortunately, I found that my UE did not send the digest response for the 
received nonce to the server after 401 unauthorized.
(digest response content is empty in the 2nd register packet.)

I think this is the cause of the authentication problem. So I changed to 
another smartphone, but the same problem has occurred.



-----Original Message-----
From: "Yuriy Gorlichenko" <ovoshl...@gmail.com>
To: "오택경" <o...@kaist.ac.kr>;
Cc: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>;
Sent: 2021-08-24 (화) 21:37:36 (UTC+09:00)
Subject: Re: Re: [SR-Users] [VoLTE] 401 unauthorized error

I do not remember, to be honest, if IMS supports basic md5 auth algorithms. You 
need to go through specs about algo supported. Also try to look into docs of 
kamailio ims modules which algorithms it implements. If you find one which 
satisfies your device for negotiation then just use it. If no - try to update 
your client to have support of one of the proper algorithms.

On Tue, 24 Aug 2021, 10:45 오택경, <o...@kaist.ac.kr 
mailto:o...@kaist.ac.kr> wrote:
Thank you for your help!

I looked into the UE's  IMS register request as you told me. (the content 
of request is shown below)

As my thinking, my UE can support only two algorithms: hmac-sha1-96 and 
hmac-md5-96.

But fhoss cannot support above auth algorithms (fhoss can support 
digest-akav1-md5, digest-akav2-md5, digest, http_digest_md5, 
early-ims-security, nass-bundled and sip digest).

What algorithm should I switch to for authentication in fhoss? Or do I have to 
change the UE device (smartphone) for auth?

Very thanks,
Taekkyung Oh.

<IMS register request from the UE>
Frame 4153: 840 bytes on wire (6720 bits), 840 bytes captured (6720 bits) on 
interface 0
Ethernet II, Src: 02:42:ac:16:00:16 (02:42:ac:16:00:16), Dst: 02:42:ac:16:00:06 
(02:42:ac:16:00:06)
Internet Protocol Version 4, Src: 172.22.0.22, Dst: 172.22.0.6
User Datagram Protocol, Src Port: 2152, Dst Port: 2152
GPRS Tunneling Protocol
Internet Protocol Version 4, Src: 192.168.101.3, Dst: 172.22.0.21
Transmission Control Protocol, Src Port: 5060, Dst Port: 5060, Seq: 1021, Ack: 
1, Len: 750
[2 Reassembled TCP Segments (1770 bytes): #4147(1020), #4153(750)]
Session Initiation Protocol (REGISTER)
    Request-Line: REGISTER sip:ims.mnc001.mcc001.3gppnetwork.org 
http://ims.mnc001.mcc001.3gppnetwork.org SIP/2.0
        Method: REGISTER
        Request-URI: sip:ims.mnc001.mcc001.3gppnetwork.org 
http://ims.mnc001.mcc001.3gppnetwork.org
            Request-URI Host Part: 
ims.mnc001.mcc001.3gppnetwork.org http://ims.mnc001.mcc001.3gppnetwork.org
        [Resent Packet: False]
    Message Header
        To: 
<sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org>
            SIP to address: 
sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org
                SIP to address User 
Part: 001010000031094
                SIP to address Host 
Part: ims.mnc001.mcc001.3gppnetwork.org http://ims.mnc001.mcc001.3gppnetwork.org
        From: 
<sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org>;tag=qyecbkJ
            SIP from address: 
sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:sip:001010000031...@ims.mnc001.mcc001.3gppnetwork.org
                SIP from address User 
Part: 001010000031094
                SIP from address Host 
Part: ims.mnc001.mcc001.3gppnetwork.org http://ims.mnc001.mcc001.3gppnetwork.org
            SIP from tag: qyecbkJ
        Contact: <sip:001010000031094@192.168.101.3:5060 
http://sip:001010000031094@192.168.101.3:5060>;+sip.instance="<urn:gsma:imei:86355804-632692-0>";+g.3gpp.accesstype="cellular2";audio;video;+g.3gpp.smsip;+g.3gpp.icsi-ref="urn%3Aurn-7%3A3gpp-service.ims.icsi.mmtel";
            Contact URI: 
sip:001010000031094@192.168.101.3:5060 
http://sip:001010000031094@192.168.101.3:5060
                Contact URI User Part: 
001010000031094
                Contact URI Host Part: 
192.168.101.3
                Contact URI Host Port: 
5060
            Contact parameter: 
+sip.instance="<urn:gsma:imei:86355804-632692-0>"
            Contact parameter: 
+g.3gpp.accesstype="cellular2"
            Contact parameter: audio
            Contact parameter: video
            Contact parameter: +g.3gpp.smsip
            Contact parameter: 
+g.3gpp.icsi-ref="urn%3Aurn-7%3A3gpp-service.ims.icsi.mmtel"\r

        Expires: 600000
        P-Access-Network-Info: 
3GPP-E-UTRAN-FDD;utran-cell-id-3gpp=0010100010019B01
            access-type: 3GPP-E-UTRAN-FDD
            utran-cell-id-3gpp: 0010100010019B01
        Supported: path,sec-agree
        Allow: 
INVITE,ACK,OPTIONS,BYE,CANCEL,UPDATE,PRACK,NOTIFY,MESSAGE,REFER
        Require: sec-agree
        Proxy-Require: sec-agree
         [truncated]Security-Client: 
ipsec-3gpp;alg=hmac-sha-1-96;prot=esp;mod=trans;ealg=des-ede3-cbc;spi-c=10559690;spi-s=65664952;port-c=31112;port-s=31803,ipsec-3gpp;alg=hmac-sha-1-96;prot=esp;mod=trans;ealg=aes-cbc;spi-c=10559690;spi-s=65664
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-sha-1-96
            prot: esp
            mod=trans
            ealg: des-ede3-cbc
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-sha-1-96
            prot: esp
            mod=trans
            ealg: aes-cbc
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-sha-1-96
            prot: esp
            mod=trans
            ealg: null
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-md5-96
            prot: esp
            mod=trans
            ealg: des-ede3-cbc
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-md5-96
            prot: esp
            mod=trans
            ealg: aes-cbc
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
            [Security-mechanism]: ipsec-3gpp
            alg: hmac-md5-96
            prot: esp
            mod=trans
            ealg: null
            spi-c: 10559690 (0x00a120ca)
            spi-s: 65664952 (0x03e9f7b8)
            port-c: 31112
            port-s: 31803
        Authorization: Digest 
username="001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:001010000031...@ims.mnc001.mcc001.3gppnetwork.org",realm="ims.mnc001.mcc001.3gppnetwork.org
 
http://ims.mnc001.mcc001.3gppnetwork.org",uri="sip:ims.mnc001.mcc001.3gppnetwork.org
 http://ims.mnc001.mcc001.3gppnetwork.org",nonce="",response="";
            Authentication Scheme: Digest
            Username: 
"001010000031...@ims.mnc001.mcc001.3gppnetwork.org 
mailto:001010000031...@ims.mnc001.mcc001.3gppnetwork.org";
            Realm: 
"ims.mnc001.mcc001.3gppnetwork.org http://ims.mnc001.mcc001.3gppnetwork.org";
            Authentication URI: 
"sip:ims.mnc001.mcc001.3gppnetwork.org http://ims.mnc001.mcc001.3gppnetwork.org";
            Nonce Value: ""
            Digest Authentication Response: ""
        Call-ID: txecbknlk@192.168.101.3 
mailto:txecbknlk@192.168.101.3
        CSeq: 1 REGISTER
            Sequence Number: 1
            Method: REGISTER
        Max-Forwards: 70
        Via: SIP/2.0/TCP 
192.168.101.3:5060;branch=z9hG4bKrzecbkJzsat7Xk6daqm5;rport
            Transport: TCP
            Sent-by Address: 192.168.101.3
            Sent-by port: 5060
            Branch: z9hG4bKrzecbkJzsat7Xk6daqm5
            RPort: rport
        User-Agent: IM-client/OMA1.0 HW-Rto/V1.0
        Content-Length: 0






-----Original Message-----From: "Yuriy Gorlichenko" <ovoshl...@gmail.com 
mailto:ovoshl...@gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.org>;
Cc:
Sent: 2021-08-24 (화) 05:55:26 (UTC+09:00)
Subject: Re: [SR-Users] [VoLTE] 401 unauthorized error


Hi  401 is normal response for sip authIt is also normal response for IMS 
service
Look into sip basic auth mechanism to clarify what is going on here and 
additionally look into Spec of IMS auth. There should be only auth algo 
change 
I believe you did not check further request processing.On Mon, 23 Aug 2021, 
18:19 오택경, <o...@kaist.ac.kr mailto:o...@kaist.ac.kr> wrote:
Hi.

I am implementing the VoLTE setup with the dockerized project 
(https://github.com/herlesupreeth/docker_open5gs 
https://github.com/herlesupreeth/docker_open5gs).

I have almost done to run the VoLTE service, but 401 unauthorized error in sip 
and auth-pending error in fhoss have occured.

How can I fix this problem?

I will share the discussion note in which I tried to solve some problems 
including the above one.
: https://github.com/herlesupreeth/docker_open5gs/issues/55 
https://github.com/herlesupreeth/docker_open5gs/issues/55

Very thanks,
Taekkyung Oh.
__________________________________________________________Kamailio - Users 
Mailing List - Non Commercial Discussions  * sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.orgImportant: keep the mailing list in the 
recipients, do not reply only to the sender!Edit mailing list options or 
unsubscribe:  * 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


__________________________________________________________ Kamailio - Users 
Mailing List - Non Commercial Discussions * sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.org Important: keep the mailing list in the 
recipients, do not reply only to the sender! Edit mailing list options or 
unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users





-----Original Message-----From: "Yuriy Gorlichenko" <ovoshl...@gmail.com 
mailto:ovoshl...@gmail.com>
To: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.org>;
Cc:
Sent: 2021-08-24 (화) 05:55:26 (UTC+09:00)
Subject: Re: [SR-Users] [VoLTE] 401 unauthorized error


Hi  401 is normal response for sip authIt is also normal response for IMS 
service
Look into sip basic auth mechanism to clarify what is going on here and 
additionally look into Spec of IMS auth. There should be only auth algo 
change 
I believe you did not check further request processing.On Mon, 23 Aug 2021, 
18:19 오택경, <o...@kaist.ac.kr mailto:o...@kaist.ac.kr> wrote:
Hi.

I am implementing the VoLTE setup with the dockerized project 
(https://github.com/herlesupreeth/docker_open5gs 
https://github.com/herlesupreeth/docker_open5gs).

I have almost done to run the VoLTE service, but 401 unauthorized error in sip 
and auth-pending error in fhoss have occured.

How can I fix this problem?

I will share the discussion note in which I tried to solve some problems 
including the above one.
: https://github.com/herlesupreeth/docker_open5gs/issues/55 
https://github.com/herlesupreeth/docker_open5gs/issues/55

Very thanks,
Taekkyung Oh.
__________________________________________________________Kamailio - Users 
Mailing List - Non Commercial Discussions  * sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.orgImportant: keep the mailing list in the 
recipients, do not reply only to the sender!Edit mailing list options or 
unsubscribe:  * 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


__________________________________________________________ Kamailio - Users 
Mailing List - Non Commercial Discussions * sr-users@lists.kamailio.org 
mailto:sr-users@lists.kamailio.org Important: keep the mailing list in the 
recipients, do not reply only to the sender! Edit mailing list options or 
unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users 
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users







__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
  * sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the 
sender!
Edit mailing list options or unsubscribe:
  * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
  * sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the 
sender!
Edit mailing list options or unsubscribe:
  * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to