Thanks and how can I control that timer after enabling the contact ? Regarding the dbase flag I don't see the current values saved there , it's only shown when dumping. ________________________________ From: Henning Westerholt <[email protected]> Sent: Thursday, April 14, 2022 10:50:15 AM To: Ahmed Fouad <[email protected]> Cc: Kamailio (SER) - Users Mailing List <[email protected]> Subject: RE: [SR-Users] UAC parameter for enabling and disabling remote registration
Hello, if you do the reg enable and it shows also enabled in the flags, there should be (maybe after a timer run period) a new REGISTER send out. Regarding your request, I would try to add the DB records with “disabled” flag in the database, and then using the uac_reg_enable/_disable function in the cfg file. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Ahmed Fouad <[email protected]> Sent: Wednesday, April 13, 2022 9:15 PM To: Henning Westerholt <[email protected]> Cc: Kamailio (SER) - Users Mailing List <[email protected]> Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration Hi, I did many tests with some combinations and I'm afraid I've a problem here with registration after being disabled 1 - Having modparam("uac", "reg_active", 0) Completely disable the remote registration and can't be overridden any other options trying to enable single registration from the code or from kamcmd. 2 - Having modparam("uac", "reg_active", 1) Remote registration is automatic and sent when kamailio is restarted and all expiration is being handled perfectly. thus dumping reg_dump the flags = 20 ( 16 (2^4) - registration initialized + 4 (2^2) - registration succeeded ) I tried to disable this registration using kamcmd uac.reg_disable l_username XXXXX and it's disabled and confirmed flags: 21 (+ 1 (2^0) - registration profile is disabled )) but my problem here I didn't see unregister going with expiration = 0 to clear the registration from the remote pbx so I used kamcmd uac.reg_unregister l_username XXXXX and message went fine and extension was unregistered. tried again to enable it back using kamcmd uac.reg_enable l_username XXXXXX I see the flags goes to 16 only and no register message is being sent and it's stale like this even by running kamcmd uac.reg_reload My request is simply I've some entries in the uacreg table. I'd like to start kamailio without remote registration being enabled and have the ability to enable/disable the REGISTER messages from the configuration file. Can you please advise how to accomplish such scenario ? On Wed, Apr 13, 2022 at 11:03 AM Henning Westerholt <[email protected]<mailto:[email protected]>> wrote: Hello, don’t know without looking to the code, I’d say just give it a try and see if it works. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Ahmed Fouad <[email protected]<mailto:[email protected]>> Sent: Wednesday, April 13, 2022 4:42 PM To: Henning Westerholt <[email protected]<mailto:[email protected]>> Cc: Kamailio (SER) - Users Mailing List <[email protected]<mailto:[email protected]>> Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration Hi, I've tested this parameter and it's working as expected but I've a question here. When I start kamailio with disabled remote registration mode then from the configuration I use uac_reg_request_to(user, mode) to register only a single extension. Will this scenario work ? or the whole remote registration is disabled and needs to be enabled first ? My goal is to send single registrations only from the code logic, not when kamailio starts. On Wed, Apr 13, 2022 at 10:16 AM Henning Westerholt <[email protected]<mailto:[email protected]>> wrote: Hello, it is present e.g. in 5.5.x, also available in docs: https://kamailio.org/docs/modules/5.5.x/modules/uac.html#uac.p.reg_active Why do you think it was not merged? Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <[email protected]<mailto:[email protected]>> On Behalf Of Ahmed Fouad Sent: Wednesday, April 13, 2022 4:11 PM To: Kamailio (SER) - Users Mailing List <[email protected]<mailto:[email protected]>> Subject: [SR-Users] UAC parameter for enabling and disabling remote registration Hi, I was wondering if this patch was ever merged to the current release(s) https://github.com/kamailio/kamailio/commit/49f354276df3cfc2cdb0f85b5a1839f86733aead?diff=split I'd like to start Kamailio with all remote registration disabled then enable based on the code logic Thanks in advance, -- Best Regards, Ahmed Fouad -- Best Regards, Ahmed Fouad
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
