Hello,

you can tune the transaction timeouts with tm configuration values and also tm 
functions to your needs. But I agree that at a server failure in ringing state 
it takes usually longer to go to the failure_route.

For that reasons you use dispatcher probing, it will detect the failure and 
then route the next calls to a working server. The calls in ringing state will 
of course not handled by that and probably fail.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: Devang Dhandhalya <devang.dhandha...@ecosmob.com>
Sent: Wednesday, January 4, 2023 10:07 AM
To: Henning Westerholt <h...@gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Recover call in ringing state

Hello Henning

Thanks for Response, When Remote Server goes down in Ringing Call state we will 
not get any Negative Response from remote server and we should not  wait for 
transaction timeout because its to 1-2 min
so in this case there is anything that we found Remote server is down and we 
can check INVITE transaction failover and we generate INVITE using that same 
transaction.
Using the Dispatcher event route we will get if any of the remote servers are 
down but how we can get a call transaction is failed and can generate a call.


Regards
Devang Dhandhalya

On Tue, Dec 6, 2022 at 3:12 PM Henning Westerholt 
<h...@gilawa.com<mailto:h...@gilawa.com>> wrote:
Hello,

you can do this by using a failure_route. There is one example for voicemail I 
think in the Kamailio default configuration.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: sr-users 
<sr-users-boun...@lists.kamailio.org<mailto:sr-users-boun...@lists.kamailio.org>>
 On Behalf Of Devang Dhandhalya
Sent: Wednesday, November 30, 2022 7:16 PM
To: Kamailio (SER) - Users Mailing List 
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: [SR-Users] Recover call in ringing state

Hello All

I have below setup :
SBC -> kamailio -> Media server(remote) -> web-client

Call comes from sbc to kamilio and it relays to Remote server to end user, In 
Ringing state if remote server goes down then in kamailio there is any way to 
Recover that ringing call like we can generate new invite for other Remote 
server which is active state, for relaying call i am using dispatcher module..

I tried with tm.cancel RPC command but it works only if the remote server is 
running , when I crash the remote server at that time tm.cancel is not 
generating cancel to remote server.

Please suggest if there is any other way to generate INVITE.

Regards
Devang Dhandhalya

[Das Bild wurde vom Absender entfernt.]<https://www.ecosmob.com/>
Disclaimer
In addition to generic Disclaimer which you have agreed on our website, any 
views or opinions presented in this email are solely those of the originator 
and do not necessarily represent those of the Company or its sister concerns. 
Any liability (in negligence, contract or otherwise) arising from any third 
party taking any action, or refraining from taking any action on the basis of 
any of the information contained in this email is hereby excluded.

Confidentiality
This communication (including any attachment/s) is intended only for the use of 
the addressee(s) and contains information that is PRIVILEGED AND CONFIDENTIAL. 
Unauthorized reading, dissemination, distribution, or copying of this 
communication is prohibited. Please inform originator if you have received it 
in error.

Caution for viruses, malware etc.
This communication, including any attachments, may not be free of viruses, 
trojans, similar or new contaminants/malware, interceptions or interference, 
and may not be compatible with your systems. You shall carry out virus/malware 
scanning on your own before opening any attachment to this e-mail. The sender 
of this e-mail and Company including its sister concerns shall not be liable 
for any damage that may incur to you as a result of viruses, incompleteness of 
this message, a delay in receipt of this message or any other computer problems.


--
Regards,
Devang Dhandhalya

[Das Bild wurde vom Absender entfernt. Ecosmob Technologies Pvt. 
Ltd.]<https://www.ecosmob.com/>

Ecosmob Technologies Pvt. Ltd.
https://www.ecosmob.com<https://www.ecosmob.com/>

VoIP | Web | Mobile | IoT | Big Data

[cid:~WRD1504.jpg]<https://www.ecosmob.com/>
Disclaimer
In addition to generic Disclaimer which you have agreed on our website, any 
views or opinions presented in this email are solely those of the originator 
and do not necessarily represent those of the Company or its sister concerns. 
Any liability (in negligence, contract or otherwise) arising from any third 
party taking any action, or refraining from taking any action on the basis of 
any of the information contained in this email is hereby excluded.

Confidentiality
This communication (including any attachment/s) is intended only for the use of 
the addressee(s) and contains information that is PRIVILEGED AND CONFIDENTIAL. 
Unauthorized reading, dissemination, distribution, or copying of this 
communication is prohibited. Please inform originator if you have received it 
in error.

Caution for viruses, malware etc.
This communication, including any attachments, may not be free of viruses, 
trojans, similar or new contaminants/malware, interceptions or interference, 
and may not be compatible with your systems. You shall carry out virus/malware 
scanning on your own before opening any attachment to this e-mail. The sender 
of this e-mail and Company including its sister concerns shall not be liable 
for any damage that may incur to you as a result of viruses, incompleteness of 
this message, a delay in receipt of this message or any other computer problems.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-le...@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the 
sender!
Edit mailing list options or unsubscribe:

Reply via email to