Thanks Fred! That worked! I did tried adding a listener but using udp:0.0.0.0:5062, thinking that any address could listen to port 5062, but it did not work. Honestly had not thought about using udp:10.20.0.1:5062 address..... dumb me!
Owe you a beer ... or 2 ;) *Sérgio Charrua* *www.voip.pt <http://www.voip.pt/>* On Fri, Mar 1, 2024 at 3:52 PM Fred Posner <f...@pgpx.io> wrote: > > On Mar 1, 2024, at 10:30 AM, Sergio Charrua via sr-users < > sr-users@lists.kamailio.org> wrote: > > > > Hi all! > > > > I'm testing the DMQ module, but having difficulties setting it up. > > > > [...] > > My kamailio.cfg is as follows : > > > > [...] > > listen=udp:0.0.0.0:5060 > > listen=tcp:0.0.0.0:5060 > > [...] > > modparam("dmq", "server_address", "sip:10.20.0.2:5062") > #DMQ_SERVER_ADDRESS > > You don’t have a listener for this address… so add a listen=udp: > 10.20.0.2:5062 > > > > modparam("dmq", "notification_address", "sip:10.20.0.4:5062 > ")#DMQ_NOTIFICATION_ADDRESS > > modparam("dmq", "multi_notify", 1) > > modparam("dmq", "num_workers", 4) > > modparam("dmq", "ping_interval", 15) > > modparam("dmq_usrloc", "enable", 1) > > > > If I check syntax (using -c parameter) all is ok. Once I start Kamailio, > the following error appears on system log: > > > > INFO: dmq [dmq.c:164]: make_socket_str_from_uri(): unknown transport > protocol - fall back to udp > > ERROR: dmq [dmq.c:241]: mod_init(): server_uri is not a socket the proxy > is listening on > > This advises the problem… server_uri is not a socket that kamailio is > listening on. > > > ERROR: <core> [core/sr_module.c:1030]: init_mod(): Error while > initializing module dmq (/usr/local/lib64/kamailio/modules/dmq.so) > > > > I have used UDP as well as SIP as protocols for Server Address and > Notification Address, used port 5060 and 5062 (and others too), even added > a new listen=udp:0.0.0.0:5062, as well as listen=tcp:0.0.0.0:5062 but > the result is always the same. > > > > Using Kamailio 5.7.4 on RHEL 9 with SELINUX set to enforcing (if > relevant). No firewall active. > > local IP address is 10.20.0.1 > > second kamailio node IP address is 10.20.0.4 > > > > Any ideas? At first sight, it seems to be all set as per documentation. > I even found other configurations online, and apart from the IP address, > all is similar. > > > > > > Thanks in advance, > > > > Sérgio Charrua > > www.voip.pt > > > Regards, > > Fred Posner > p: +1 (352) 664-3733 > contact: https://fred.tel > >
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-le...@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
