Am 08.07.2010 18:10, schrieb Daniel-Constantin Mierla:
Hello,
On 7/8/10 5:59 PM, Matteo Campana wrote:
Hi all,
I'm using kamailio 1.5 with TLS module.
I need to make ENUM query and get NAPTR record.
> From NAPTR lookup, I'd like to relay my SIP Invite with tls protocol.
How can I tell Kamailio to use TLS protocol ( instead of udp) after
NAPTR lookup ?
I've try to set :
dns_tls_pref=1
dns_udp_pref=2
dns_tcp_pref=3
in the general section of kamailio.cfg, but I get a parse error.
these parameters were introduced in kamailio with version 3.0.
If you need TLS then it is recommended to use 3.0 anyhow, it is a far
better implementation. That will make the life easier to migrate to
upcoming 3.1 that will bring asynchronous TLS.
No matter what you have in R-URI, you can force TLS via setting outbound
proxy address to be a TLS uri:
$du = "sip:__ip_or_host__;transport=tls";
t_relay();
IIRC we do have NAPTR support in Kamailio 1.5 - don't we?
Then I think it should work when putting a domain into $du and makeing
sure that there is no transport parameter, no port, and NAPTR TLS record
has highest priority.
regards
klaus
The IP or host you can take from R-URI without any problem via PV $rd.
Other option is to use function from tm - t_relay_to_tls():
http://kamailio.org/docs/modules/stable/modules/tm.html#t_relay_to_udp
Cheers,
Daniel
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
