Hi Daniel. Thank you for your link.
Unfortunately it still either reports "Too many hops" or "Timeout". Again, everything works when connecting directly to the PBX. 2011/11/9 Daniel-Constantin Mierla <mico...@gmail.com> > Hello, > > sorry, haven't actually got to look deep at it, but I updated the config > file in the dispatcher readme (had in mind to ping you about it, but got > out of office meanwhile) -- that maybe it will help you: > > http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004 > > Should be like full config for load balancing with round robin policy, > doing failover routing in case of server error or no reply from gateways > (e.g., freeswitch). Either try with that config or try to figure out what > you need to plug in your config. > > Let me know if works this time. > > Cheers, > Daniel > > > On 11/9/11 12:18 AM, Henrik Aagaard Sørensen wrote: > > Hi Daniel. > > I just wanted to hear if you have had any time to look at the Kamailio > Dispatcher > <-> FreeSwitch problem? > > This is NOT to rush you. I've followed the mailing list and can see how > busy you are and how much involved you are in all this, so I fully respect > all the help you give to this mailing list etc. > > Best regards, > Henrik > > 2011/10/20 Henrik Aagaard Sørensen <henrikaagaardsoren...@gmail.com> > >> Hi Daniel. >> >> I've just upgraded to 3.2.0. >> >> This is my NEW kamailio.cfg: http://pastebin.com/XzXjf1VY >> This is my dispatcher.list: http://pastebin.com/9dLS8243 >> >> I've also attached a ngrep where it errors with "Too many hops" with the >> new version 3.2.0. >> >> Once again, I really appreciate all the help you give! It's remarkable >> with your effort in this. >> >> Best regards, >> Henrik >> >> >> 2011/10/17 Daniel-Constantin Mierla <mico...@gmail.com> >> >>> I will try to look over the sip traces you sent, although it is tight >>> schedule for the 3.2.0 right now -- so it may take few days. >>> >>> Cheers, >>> Daniel >>> >>> >>> On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote: >>> >>> Yes, pbx.my-domain.com is pointing to the IP of FreeSwitch. >>> sip.my-domain.com is the domain name for Kamailio. >>> >>> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >>> >>>> >>>> >>>> On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote: >>>> >>>> My dispatcher.list currently just contains: >>>> 1 pbx.my-domain.com:5060 >>>> >>>> Is pbx.my-domain.com pointing to the IP address of freeswitch? What >>>> is the domain name for kamailio ip address? >>>> >>>> Daniel >>>> >>>> >>>> >>>> I will provide a ngrep trace within an hour or two. Thank you so much >>>> for helping me. I really hope to get this solved. >>>> >>>> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >>>> >>>>> Hello, >>>>> >>>>> >>>>> On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote: >>>>> >>>>> Hi Daniel (and everyone else) again. >>>>> >>>>> I've just tried to add: >>>>> loadmodule "path.so" >>>>> modparam("path", "use_received", 1) >>>>> >>>>> and: >>>>> add_path_received() >>>>> just before the "if(!t_relay())..." in the ROUTE part. >>>>> >>>>> That made both devices get the error "Too many loops". >>>>> >>>>> what is the content of the dispatcher list file? Maybe is better to >>>>> use ds_select_domain(...) and ds_next_domain() -- cannot say it since I >>>>> haven't seen full sip trace, but maybe the problem is that freeswitch is >>>>> sending back if the r-uri address is kamailio's address. >>>>> >>>>> Cheers, >>>>> Daniel >>>>> >>>>> >>>>> >>>>> Moving the add_path_received() into the part: >>>>> if (nat_uac_test("19")) { if (method=="REGISTER") { >>>>> fix_nated_register(); add_path_received(); >>>>> made the same issues as before loading the path.so module. >>>>> >>>>> 2011/10/14 Henrik Aagaard Sørensen <henrikaagaardsoren...@gmail.com> >>>>> >>>>>> Hi Daniel (and everyone else). >>>>>> >>>>>> This is a tshark trace (is that as good as ngrep?) from Kamailio when >>>>>> there are too many loops: http://pastebin.com/yRjduB0s >>>>>> In this trace I got the note that 253 packets was dropped (and >>>>>> therefor not in the trace). >>>>>> >>>>>> And this is a trace when it times out: http://pastebin.com/KT0bJzEU >>>>>> >>>>>> I've actually looked at the PATH module, and tried several things. >>>>>> And I know this type of question is rather newbee-like, but can you help >>>>>> me >>>>>> out with the PATH module and how to integrate it correctly? >>>>>> >>>>>> I really do appreciate all the help! >>>>>> >>>>>> >>>>>> 2011/10/14 Daniel-Constantin Mierla <mico...@gmail.com> >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> when using the load balancer in front of the registrar, you have to >>>>>>> use PATH extensions for SIP (see path module in kamailio) in order to be >>>>>>> able to cope with nat. >>>>>>> >>>>>>> Then, what would be helpful, will be a ngrep trace taken on kamailio >>>>>>> server for failed calls. >>>>>>> >>>>>>> Cheers, >>>>>>> Daniel >>>>>>> >>>>>>> >>>>>>> On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote: >>>>>>> >>>>>>> I've asked a lot of question about Kamailio Dispatcher in front of >>>>>>> FreeSwitch in this mailing list. So I'm sorry that I'm still "spamming", >>>>>>> but it still fails. >>>>>>> >>>>>>> This is my status so far. >>>>>>> >>>>>>> When connecting 2 devices directly to FreeSwitch everything works. >>>>>>> When connecting to Kamailio, some calls fails with "Timeout" and some >>>>>>> fails >>>>>>> with "Too many loops". >>>>>>> >>>>>>> This is my kamailio.cfg: http://pastebin.com/KEuZmikh >>>>>>> >>>>>>> When connected directly to FreeSwitch where everything works, this >>>>>>> is how my clients are registrered in FreeSwitch: >>>>>>> http://pastebin.com/prkjkb7g >>>>>>> >>>>>>> When connected to Kamailio where nothing works, this is how my >>>>>>> clients are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv >>>>>>> >>>>>>> 215.197.145.132 (sip.my-domain.com) is my Kamailio. >>>>>>> pbx.my-domain.com is my FreeSwitch. >>>>>>> 96.224.14.164 is my IP at home, where my 2 devices are from. >>>>>>> >>>>>>> Can anyone help me out? I'm kinda lost at this point. >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Daniel-Constantin Mierla -- http://www.asipto.com >>>>>>> Kamailio Advanced Training, Dec 5-8, Berlin: >>>>>>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>>>>>> http://twitter.com/miconda >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>>> >>>>> >>>>> -- >>>>> Daniel-Constantin Mierla -- http://www.asipto.com >>>>> Kamailio Advanced Training, Dec 5-8, Berlin: >>>>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>>>> http://twitter.com/miconda >>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>>> -- >>>> Daniel-Constantin Mierla -- http://www.asipto.com >>>> Kamailio Advanced Training, Dec 5-8, Berlin: >>>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>>> http://twitter.com/miconda >>>> >>>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> -- >>> Daniel-Constantin Mierla -- http://www.asipto.com >>> Kamailio Advanced Training, Dec 5-8, Berlin: >>> http://asipto.com/u/kathttp://linkedin.com/in/miconda -- >>> http://twitter.com/miconda >>> >>> >> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla -- http://www.asipto.com > Kamailio Advanced Training, Dec 5-8, Berlin: > http://asipto.com/u/kathttp://linkedin.com/in/miconda -- > http://twitter.com/miconda > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users