I am still struggling a little with this, I have everything working, postgres & lcr modules loading what I am looking for for is a difinative working example of the information in the db tables.
my db tables: lcr_rule (lcr_id, prefix, from_uri, stopper, enabled, id) lcr_rule_target (rule_id, gw_id, priority, weight, id, lcr_id) lcr_gw gw_name, ip_addr, port, uri_scheme, transport, params, hostname, strip, prefix, tag, flags, defunct, id, lcr_id) a couple simple examples that will update the following would be VERY helpful original uri sip:1103@10.1.1.58 updated uri sip:1103@10.1.1.60 original uri 7802291103@10.1.1.58 updated uri 17802291103@10.1.1.61 at present I get the following errors 'error while parsing R-URI' & the load_gw fails. Anything you can provide that will prevent my head from exploding would be very much appreciated. Jeff On 2012-03-20, at 11:26 PM, Juha Heinanen wrote: > Jeff Russell writes: > >> We have a table with about 145,000 NPA/NXX's with differing rates and >> carriers, I would like to use the LCR module to load this table and >> rewrite the URI based on the best rate for dialled number and or a >> default route. > > lcr module selects the gateways first based on longest matching prefix > of called number and second based on priority of the gateways defined > for the matched prefix. perhaps you can map your rates to these > priorities. > > -- juha > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users