You should see the received packets if you use latest master, but they are not yet captured before topoh decodes them.
Cheers, Daniel On 12/01/16 09:45, Sergey Basov wrote: > Thank you for commits. > > I just try it and now I can see that sending packets captured properly.. > > Now there is a problem with receiving packets, I does not see Initial > invite from client into the capture. > > > -- > Best regards, > Sergey Basov e-mail: [email protected] > > tel: (+38067) 403-62-54 > > > 2016-01-11 23:54 GMT+02:00 Daniel-Constantin Mierla <[email protected]>: >> >> On 06/01/16 11:49, Daniel-Constantin Mierla wrote: >>> [...] >>>> But Packet which is send by siptrace module to homer capture server is >>>> send before topoh modifications. >>>> >>>> If you can correct this flow it will be great. >>> I will look into it as I said before. >> Can you try with master branch? I pushed a series of commits for this. >> You need to set siptrace modparam trace_mode to 1, then remove any use >> of sip_trace() function as well as setflag() with trace flag. >> >> The receiving is after topoh does decoding at this moment, but sending >> should be after topoh does enconding. Going to finalize the receiving >> soon, but thought you may want to give it a try and report if sending is >> captured properly. >> >> Cheers, >> Daniel >> >> -- >> Daniel-Constantin Mierla >> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >> Book: SIP Routing With Kamailio - http://www.asipto.com >> http://miconda.eu >> -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com http://miconda.eu _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [email protected] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
