I did try the -v (debug switch). This is how I determined that the
connection was being closed immediately after being established. The debug
also showed that the protocol never started.
TINA ILIFF
GS-12 SYSTEMS ENGINEER
HQ SSG/ILTT
CMOS PMO
DSN 596-2162 FAX 596-5345
-----Original Message-----
From: Lundstrom, Magnus [SMTP:[EMAIL PROTECTED]]
Sent: Monday, April 12, 1999 3:15 AM
To: '[EMAIL PROTECTED]'
Cc: [EMAIL PROTECTED]
Subject: RE: Connection Closed By Foreign Host after
connection establishe d on HP-UX 10.20 server
> What other configuration files or parameters do I need to
> look at on the
> remote server? I have been able to establish secure
> connections with two
> other remote servers which seem to have the same
> configuration as the remote
> servers with which I am having problems with the connection.
Tried the -v (debug) switch? If that gives nothing of interrest, try
sniffing on both segments,
tcpdump is your friend.
cheers
//Magnus
