Yeah, basically use a tool on your Winbox like SecureCRT that allows you to define additional port forwarding. Then define a port (of your choice) like 1500 at the PC end that connects to 21 (for FTP) at the far end. I leave it to you to figure the pointing and clicking to get this done. Connect via the SecureCRT in your usual way to the remote machine. Fire up WS_FTP, and create a profile for the remote machine, except reference the Winbox IP address (maybe even 127.0.0.1). Go into WS_FTP advanced tab, and change the port to open from 21 to the port you choose above (like 1500). Choose passive transfers. Connect to the client, and Bob's your uncle, there you are. Randy Bey Customer Implementation Support 255 Second Avenue South Minneapolis, MN 55479-2017 MS 2017 E-Mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Phone : (612) 667-5761 Fax : (612) 667-6169 -----Original Message----- From: Seann Dorand [mailto:[EMAIL PROTECTED]] Sent: Friday, July 09, 1999 9:23 AM To: [EMAIL PROTECTED] Subject: RE: sftp for Win98 (could we get an english translation?) Could anyone translate the link below into english? Thanks, Seann Dorand -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bey, Randy Sent: Thursday, July 08, 1999 5:59 PM To: 'Walcir Fontanini-ADM-'; Aldrovando Azeredo Araujo Cc: [EMAIL PROTECTED] Subject: RE: sftp for Win98 This is great! I have been looking (albeit not very hard lately) for a way to do this. Thanks Walcir! Randy Bey Customer Implementation Support 255 Second Avenue South Minneapolis, MN 55479-2017 MS 2017 E-Mail : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Phone : (612) 667-5761 Fax : (612) 667-6169 -----Original Message----- From: Walcir Fontanini-ADM- [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 08, 1999 11:55 AM To: Aldrovando Azeredo Araujo Cc: [EMAIL PROTECTED] Subject: Re: sftp for Win98 Aldrovando Azeredo Araujo wrote: > > Could anyone help with the following problem? > We have some computers in our local network at the Department that run > Win98. We have installed secure shell for them too. Most of the users were > used to that graphic ftp that now we have disabled. Is it possible to get > or arrange a sftp to run in a Win98 computer with the same simplicities > the standard ftp had but going through a secure channel? > I would basically like a ssh-tunneled ftp going from Win 98 to linux > computers in the local net. > I found out that Cristina Nunes ([EMAIL PROTECTED]) is looking for > somethig similar. Any solution even some script that could do that would > be welcome. > > Thanks. > > Aldrovando Azeredo. Please check this link http://www.dca.fee.unicamp.br/~petidomo/root-dicas/msg00004.html for a solution using WS-FTP (Portuguese-only !!) -walcir
