Hi, it's not so difficult. I'm using TTSSH 1.5.1 together with Exceed 6.1 aud it works fine. 1st: Mark the checkbox in TTSSH "Setup" -> "SSH Forwarding" which is labeled "X Forwarding, Display Remote X applications on local server" 2nd: Start Exceed in "passive mode" 3rd: Connect with TTSSH to your UNIX box. 4th: Start your Xsession (eg. on Sun Solaris running CDE: /usr/dt/bin/Xsession) It works fine if X11 Forwarding is enabled in your sshd on the UNIX box /Stefan -----Urspr�ngliche Nachricht----- Von: asosin [mailto:[EMAIL PROTECTED]] Gesendet am: Freitag, 31. M�rz 2000 16:45 An: '[EMAIL PROTECTED]' Betreff: Re: SSH X11 Forwarding ? Hello, I'm new to the SSH1 protocol and perhaps someone that had a little bit of experiance with it could give me some pointers ? I would like to perform X11 forwarding to one of our Unix Servers , but it's not working for me. Here are the steps I took to try the X11 forwarding to work on TTSSH 2.3 using SSH protocol V1.5 : a). Configure the TTSSH with Forwarding as follows: Setup > SSH Forwarding > Add Then Forward Local port 6000 to remote machine #.#.#.# on port 6000. Then Save those configurations. b).XDMCP by Query Host, XDMCP by Indirect Host and XDMCP by Broadcast are the options that you can set in X-Deep/32 X-Server. I chose to use XDMCP by Query Host with the XDMCP Hostname = 127.0.0.1 (Thus all the X-Server communication would now be forwarded through the SSH software on port 6000 /X-Server port to the IP number is pecified #.#.#.# c). Now ran any X11 programs all you have to do is execute them at the SSH command prompt. In theory this was supose to work, but I don't know what I am doing wrong perhpas someone who got it to work properly can point out what I should have done ? The X-Deep software is good at the at price, compared to Exceed which costs 490. Does anyone know of any X-Server software for Windows that is affordable and works great ? I included a couple of the ones I found on the net, but I hope someone can recommend one that they feel is a great deal. Is there a difference in the security of using Exceed Vs. X-Deep if you will be running it over SSH ? MI/X 2.0 X-Server - 25 http://www.microimages.com/www/html/mix/ Exceed X-Server - 490 http://www.unipress.com/hbird/exceed/ How to setup X forwarding? X-Deep X-Server - 49 http://www.pexus.com/Product_Information/product_information.html HOBLink X-Server 175 http://www.hob.de/www_us/produkte/connect/jwt.htm
