Frank S loco runs great once steam is raised and relights just fine
after it is hot. Initial lighting is horrid! The fire keeps going out,
if it gets going at all. Lighting attempts at every valve setting
possible have been repeatedly attempted. What does work is removing the
burner and applying a soft propane torch flame to it until it is hot and
reinserting it. It lights fine then and holds the flame. Any ideas what
I am missing here?
Gary Lane
PS - current outside temperatures are 50-70 degrees F. Fuel is
iso-butane. I have GAZ available but noted that the instructions
indicate not to fire with propane/butane mix.
