On 24/7/04 7:21 am, "Bede McCormack" <[EMAIL PROTECTED]> wrote:
> Yes, I have one in my old RH "Jack" loco which was transformed into a docile
> and obedient engine immediately upon installation. I also have a speed
> controller in a battery engine.
>
> The Brian Jones smoother can be set to filter out different levels of stray
> signals, the higher the setting, the slower the response time between moving
> the TX knob and servo movement.
>
> Brian's email support is excellent and he is always happy to discuss the
> best way to solve RC-related problems.
>
> Hope this helps.
> Regards,
> Bede
Thanks Bede...seems much the same system then. I found that the quickest
response time was enough to remove glitching from my 'Countess'. I did set
the gear servo to a slower rate because I thought the action of the radius
rod moving in the expansion link looked better when done slowly....
--
Tag Gorton
Editor
Garden Rail
Atlantic Publishers
http://www.atlanticpublishers.com/GR.html
Editor
16mm Today
http://www.16mmngmodellers.org.uk/
