Hi Gary,

That came through fine...we need a caption...

Here is a picture of the steam motor...reduced the file size to 6k

1. The brass motor by itself is the new SVS steam motor...SVS they make
three different configeuerations...not sure on the spelling of that word?
The steam motor here is the one I used in the "Lucy" tram that I made for a
fellow on commission. It is a two cylinder double acting with buit in 4 to 1
reduction gearing...I could never make anything that well...it takes about
an hour of running on steam///not air to bed in properly...it takes up a
space approx 30 by 40 mm...that includes the gearing as well...they make an
inline version of the same motor suitable for marine/boat use...but would
fit inplace of the electric pullmore motor in a Lionel Berkshire  with a bit
of fiddling reducing the hight of the frame to get the motor in...it is a
direct coupled steam motor in that configueration...theres that word again??
it would couple up to the Lionel worm drive...I would make an internally
fired butane arrangement...there is loads of room inside the shell and
because the fire is surounded by water the metal casting of the Lionel
should be safe...wow did I get off track with that...but these small steam
motors could be fitted in a variety of models.


...Tony 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: extrasmallsvssteammotor.jpg
Type: image/jpeg
Size: 5903 bytes
Desc: not available
Url : 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20051107/49537f60/extrasmallsvssteammotor.jpg
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to