>  Gentlemen,

Thanks for your helpful inputs on the Mikado, so it's black cord 
insulation wrapping or paint! I can't see myself winding thread 
around the tube however!

Bert, I believe that the tubes are sometimes wire wrapped (as Aster 
did on the C&S Mogul) because the line carried gas under pressure 
from a tank in the tender to a tank in the cab in order to for the 
heat from the boiler to heat the tank and keep the gas  from becoming 
liquid! There is very little pressure in the Mikado silicon tubing, 
just light gas flow after it has been released from the butane tank. 
It's the  instant  pressure drop as the gas leaves the tanks that 
cools it an turns it back to liquid, especially when the fuel in the 
tank is already cool

Gary, Thanks for the links, especially the Pipers from Ireland!!

Geoff.
>
>
>If you just are going to disguise the white tube by sliding black tube over
>it, insulation removed from a wire should do the trick for you.
>  CatBoat


I figured heat shrink tubing might be flexible enough before it is shrunk to
conform, but once heated it is pretty stiff. Could you use some of the heat
shrink thin walled tubing that is softer and not heat it?  Another idea
might be to wrap the fuel line with black thread. Sound tedious, but fly
tying and my Uilleann Pipes both require wrapping line in close order wraps
to get color and/or air tight seals. There are many different types of
thread and different sizes of thread as well. You could use a soft
embroidery thread since it would flatten out fairly wide, thus requiring
fewer wraps to cover the tube. Hey, I just thought of some of the woven
tubes that are used to cover high heat electric wiring like for ranges and
toasters. You might be able to locate some of that wiring or just some sort
of woven tube that might be carried by a sewing shop or a craft store.
Most useful links first:
http://www.alphawire.com/pages/fit_fabric.cfm   Highly flexible electric
wire woven insulating tubing
http://www.techlib.com/reference/insulation.html     Insulating materials
including tubes
http://www.bearlodgeangler.com/tubing_materials.htm    Fly tying tubing
Ok, that is enough suggestions. I am looking forward to seeing if any of
these products might be of use to Mr. Lunkenheimer and Associate.

If you do not know Uilleann Pipe music (not the same as Scottish Highland
pipes, people dance to and like listening to Uilleann Pipes in a tavern or
living room, while Highland Pipes I think sound great on a hill some
distance away) Listen to a great Uilleann Chanter sound sample by clicking
on David Power

http://www.thegreatnorthernirishpipersclub.org/tionol/tionol2005.html  

~ Gary - Steaming over Terror Trestle,




Folks,

  forgive me for making my offer, but it worked well on my C-16 now
  almost 5 years old, and my K-27. Both had silver colored steel
  wound plastic gas tubing. I disliked the obvious appearance which stood
  out like the proverbial sore thumb. So I treated it as I did some of
  my battery on board electric models. I took a can of automotive mat black
  paint and sprayed the tubing black. The result is they are still black. I
  degreased with locktite degreaser thoroughly prior to spraying,
  expensive but it seems effective. I did the same with electric cables
  which now look like they "belong". One other small advantage is the steel
  wound tubing does not tend to kink with the years, Well, not so far.
  I have no problems with reduced gas flow, which I have heard of from
  more illustrious models without the wound tubes (pipes)?  No
  guarantee with this because I'm not sure if the plastic is similar
  but I suspect it may be because natural gasses usually play havoc
  with "normal" rubber - Plastic tubing.

  I hear with regret of the bad news from Diamondhead. Weather
  permitting I will be running at the ten year event at Sinsheim 13th,
  14th, 15th Jan.  Its a pity we cant drain the Atlantic for a couple
  of weeks. It would be great to meet some of you who are in the main
  names around which I have built my own characters based on the
  exchange of mails. (Naturally ones you would be proud of)!!

  That's my two penneth again for what its worth.

  Have a good one

  Bert,

  Snowed in, in the Austrian alps.






_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to