Royce: The instrument you are thinking about used by gun smiths is called a
"bore scope". It depends on the ability of a transparent plastic rod to
transmit light and vision. Of course the ability to see inside your boiler
would
depend on how many openings are in the shell too. Two would be needed, one to
get light in there and one to "peer" through. What style boiler you have to
deal with, on my larger 3-1/2 inch gauge boiler for Virginia there are plenty
of openings. The safety valves are on a larger plug that screws into the top
of the dome and there is a larger blow down plug at the bottom of the fire box
ring. But, even with those looking inside doesn't tell much as through the
top all you see is either the top of the tube bundle or the top of the fire
box. Through the blow down port all that can be seen is a portion or the mud
ring where the valve connects.
What I have done at times is to fill the boiler with house hold vinegar and
let soak a couple of days then bring up pressure to about 5 psi and open the
blow down and see what comes out.
(Of course scale would be disolved in the vinegar and would not show.)
I would not use the vinegar in anything but an all copper boiler.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20061016/fb5ba22d/attachment.html
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html