The Steamlines Shay given to me to repair after a machinist burned the
cab off, bent the side frames, burned the smoke box, burned a hole in
the "super heater" (this was a design problem not machinist caused
damage), cut every steam line, and failed to break the vacuum that
occurs while the loco cooled after firing and thus sucking steam oil
into the boiler. I used degreasers in the boiler repeatedly before the
steam oil foam was completely eliminated. The final degreaser and soap
remover effort was brake cleaner in a spray can. Of course I had to
leave the boiler open for days to ensure all of that fluid evaporated.
I judged the boiler was clean when degreasers showed no discoloration
after being shaken about in the boiler for a few minutes. BTW, steam
pressure was vastly improved once the insulating steam oil foam was
removed. 

~ Gary, scudding over Terror Trestle
http://community.webshots.com/user/raltzenthor 
http://www.angelfire.com/or/trainguy/
 

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to