Brad, Jeff Young did an article in GR not too long ago about  
installing R/C into a Ruby. I believe it's been within the past year  
or so. There are one or two folks who make pre-formed brackets to  
mount servos in the cab, which makes the job that much easier. For  
mine, I used two micro servos ($13 each from Colpar Hobbies on  
Havana) and a Futaba 2-channel radio transmitter/receiver I got off  
of ebay for $25 or so. It's not "glitchproof," but quite adequate.  
You can buy "servo smoothers" which are essentially noise filters for  
the servos that smooth things out, but they're not cheap.

Having said that, the advantage of using the el-cheapo micro servos  
is that they're slow to respond. That's crappy for R/C planes and  
things like that, but fantastic for live steam where you want slow,  
controlled movement. That's one of those "happy accident" things.  
That, and at $13 each, if you accidentally kill 'em, you're not out a  
ton of money. Drop me a note. I'm on the east end of Centennial, out  
by Quincy Reservoir. I'll show you how I installed the R/C in my Ruby.

Later,

K
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to