Harry Wade wrote:
> Can someone tell me what the thread of the filler cap of the original boiler 
> is?  1/4-32?
> Thanks,
> Harry

Harry:  I have an unbuilt Midwest boiler kit.  The outside diameter over 
the thread of the filler bush (no measurement wires) is .390 inches. 
This is the part soldered to the top of the boiler.  As best I can tell 
the thread pitch is 28.

The filler bush is also threaded on the inside (through the center) and 
that hole is .214 when touching the internal threads and the pitch of 
these is also 28.  The height of the filler bush is .218

The filler cap measures .535 over the knurled top and .510 over the base 
of the cap.  The depth of the inside threads is ~.200.

Best wishes

Clark


-------------- next part --------------
A non-text attachment was scrubbed...
Name: MidwestCap.jpg
Type: image/jpeg
Size: 71839 bytes
Desc: not available
Url : 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080113/2616d36b/MidwestCap.jpg
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to