I run my 3-1/2 inch gauge Virginia in my back yard with a min radius curve  
of 22 feet which would stay inside of a normal 50 foot lot. One great advantage 
 of a ground level ride on locomotive is you can get full scale smoke and 
coal  cinders in your eye. (Also I like the feel and sound of crossing track 
joints,  even gone now from full scale trains with welded track) I settled on 
that 
radius  because of a couple of out buildings (work shops) that did not allow 
me to use  the full width of our "horse property" lot. (The only horse we keep 
in our lot  is my iron horse, but neighbors have hay eating horses, emus, 
sheep, goats etc.) 
 
One mistake I made was to use aluminum extruded rail since it looked so  
nice, but here in the desert where it can be well over 100 degrees in the 
summer  
and freeze in the winter the expansion and contraction of aluminum rail plays  
heck with the joints although I tried to allow for expansion when I laid it. 
(My  highly precise "popsicle stick" gauge between rail ends at each joint.) 
 
 
 
John  Meacham
from the high deserts of Calif
12 inch Atlas lathe, mini mill, HF  band saw and a rusty file. 



**************Ideas to please picky eaters. Watch video on AOL Living.      
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080225/a31daddd/attachment.html
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to