The hole you drill in the line for a displacement lubricator is smaller  than 
you would think.  I don't have a drawing handy, but for our sized  stuff I 
would try about a number 59 or 60 drill (I don't know what that would be  in 
British drill sizing)  Then if you are just doing short test runs I  would 
think 
it would be enough to squirt a bit of steam oil when starting up and  don't 
use a lubricator at all. (On a locomotive you would need one as they run  for 
longer periods)  
 
There is a nice looking De Winton type loco described for O gauge in a book  
by Stan Bray along with several stationary oscillating cylinder engines. The  
loco is alcohol fired and uses a two cylinder double acting engine to drive 
the  coupled wheels. (But, check all the dimensions the drawings and the text 
do 
not  match in places) Stan also has a couple of vertical boilers described in 
the  text and information on burners. 
 
 
 
In a message dated 8/21/2008 6:08:16 A.M. Pacific Daylight Time,  
[EMAIL PROTECTED] writes:

--- so  let's change that with a couple of questions. I built a hydrostatic  
(displacement) oiler for a vertical boiler that I have to test engines that I  
have built or repaired after running them on air, but before I complete the  
assembly. It works but it yaks out most of the oil at the beginning. The hole  
I drilled into the steam supply is too large. Is there a rule of thumb or  
recommended orifice size for our scale locos? (When I drilled it, it just  
looked WAY too small, so I opened it up some.)

Second question: What is  the best alcohol starter loco that includes the 
finer points of alky loco  firing (i.e. blower and all the difficult bits of 
which I am unaware)? I'm  thinking that would eliminate pot boilers, but I'm 
asking for opinions here  and I know everyone has one.

Dave Orwig


-------------- next  part --------------
A non-text attachment was scrubbed...
Name: not  available
Type: application/ms-tnef
Size: 3569 bytes
Desc: not  available
Url :  
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080821/83be9de9/attachment.bin
_______________________________________________
SSLiveSteam  mailing list
Send messages: [email protected]
Cancel  subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules:  http://www.45mm.com/sslivesteam_guide.html






**************It's only a deal if it's where you want to go. Find your travel 
deal here.      
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20080822/9668b83e/attachment.html
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to