> On May 2, 2026, at 01:49, Lars Tunkrans <[email protected]> wrote: > > Hi > > > the RPI 4 has two mini-HDMI connectors. > Does both RPI4 use the same HDMI port ?
Yes. Both use the primary port. > If the system with the issue has console connected to the secondary > HDMI port ..... > could be the cause. > > regards. > > On 5/2/26 08:42, Doug Hardie wrote: >> I have one server (Raspberry Pi 4) which during boot shows all the hardware >> configuration, but then stops until the Login prompt appears. The other >> servers show the startup of each service and various other outputs. There >> is a 10 minute gap on the one server and I would like to see where it is >> during that process for that time. I have tried to find differences between >> the server configurations and haven't found the one that controls the >> startup output. What controls that? Thanks, >> >> -- Doug >> >> > -- > ------------------------- > Lars Tunkrans > Oracle SPARC/Solaris System Administrator > Fujitsu M12 SPARC Specilaist > >
