From: Luis R. Rodriguez <[email protected]> commit 904879748d7439a6dabdc6be9aad983e216b027d upstream.
The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Signed-off-by: Luis R. Rodriguez <[email protected]> Signed-off-by: John W. Linville <[email protected]> Signed-off-by: Paul Gortmaker <[email protected]> --- drivers/net/wireless/ath/ath9k/eeprom.h | 2 +- drivers/net/wireless/ath/regd.h | 1 - 2 files changed, 1 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 2f2993b..104e3ea 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -61,7 +61,7 @@ #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 +#define CTL_MODE_M 0xf #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index a1c3952..345dd97 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -31,7 +31,6 @@ enum ctl_group { #define NO_CTL 0xff #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 -- 1.7.3.3 _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
