commit: 0af212ba8f123c2eba151af7726c34a50b127962 From: Alan Stern <[email protected]> Date: Wed, 15 Jun 2011 16:27:43 -0400 Subject: [PATCH] USB: don't let errors prevent system sleep
This patch (as1464) implements the recommended policy that most errors during suspend or hibernation should not prevent the system from going to sleep. In particular, failure to suspend a USB driver or a USB device should not prevent the sleep from succeeding: Failure to suspend a device won't matter, because the device will automatically go into suspend mode when the USB bus stops carrying packets. (This might be less true for USB-3.0 devices, but let's not worry about them now.) Failure of a driver to suspend might lead to trouble later on when the system wakes up, but it isn't sufficient reason to prevent the system from going to sleep. Signed-off-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/core/driver.c | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a176..81add81 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) for (i = n - 1; i >= 0; --i) { intf = udev->actconfig->interface[i]; status = usb_suspend_interface(udev, intf, msg); + + /* Ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; if (status != 0) break; } } - if (status == 0) + if (status == 0) { status = usb_suspend_device(udev, msg); + /* Again, ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; + } + /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
