This is a note to let you know that I've just added the patch titled
USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also will be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From d0f2fb2500b1c5fe4967eb45d8c9bc758d7aef80 Mon Sep 17 00:00:00 2001
From: Wang Zhi <[email protected]>
Date: Wed, 17 Aug 2011 10:39:31 +0800
Subject: USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in
ehci_bus_resume().
>From EHCI Spec p.28 HC should clear PORT_SUSPEND when SW clears
PORT_RESUME. In Intel Oaktrail platform, MPH (Multi-Port Host
Controller) core clears PORT_SUSPEND directly when SW sets PORT_RESUME
bit. If we rely on PORT_SUSPEND bit to stop USB resume, we will miss
the action of clearing PORT_RESUME. This will cause unexpected long
resume signal on USB bus.
Signed-off-by: Wang Zhi <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/ehci-hub.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index e051b30..4c32cb1 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -343,7 +343,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
u32 temp;
u32 power_okay;
int i;
- u8 resume_needed = 0;
+ unsigned long resume_needed = 0;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -416,7 +416,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
temp |= PORT_RESUME;
- resume_needed = 1;
+ set_bit(i, &resume_needed);
}
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
}
@@ -431,8 +431,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- if (test_bit(i, &ehci->bus_suspended) &&
- (temp & PORT_SUSPEND)) {
+ if (test_bit(i, &resume_needed)) {
temp &= ~(PORT_RWC_BITS | PORT_RESUME);
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
--
1.7.6
_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable
