The patch titled
     arch/powerpc/sysdev/fsl_rio.c: correct IECSR register clear value
has been removed from the -mm tree.  Its filename was
     fsl-rio-correct-iecsr-register-clear-value.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: arch/powerpc/sysdev/fsl_rio.c: correct IECSR register clear value
From: Liu Gang-B34182 <b34...@freescale.com>

This bug causes the IECSR register clear failure.  In this case, the RETE
(retry error threshold exceeded) interrupt will be generated and cannot be
cleared.  So the related ISR may be called persistently.

The RETE bit in IECSR is cleared by writing a 1 to it.

Signed-off-by: Liu Gang <gang....@freescale.com>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: Kumar Gala <ga...@kernel.crashing.org>
Cc: <sta...@kernel.org>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---

 arch/powerpc/sysdev/fsl_rio.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff -puN 
arch/powerpc/sysdev/fsl_rio.c~fsl-rio-correct-iecsr-register-clear-value 
arch/powerpc/sysdev/fsl_rio.c
--- a/arch/powerpc/sysdev/fsl_rio.c~fsl-rio-correct-iecsr-register-clear-value
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -54,6 +54,7 @@
 #define ODSR_CLEAR             0x1c00
 #define LTLEECSR_ENABLE_ALL    0xFFC000FC
 #define ESCSR_CLEAR            0x07120204
+#define IECSR_CLEAR            0x80000000
 
 #define RIO_PORT1_EDCSR                0x0640
 #define RIO_PORT2_EDCSR                0x0680
@@ -1089,11 +1090,11 @@ static void port_error_handler(struct ri
 
        if (offset == 0) {
                out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
-               out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0);
+               out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
                out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
        } else {
                out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
-               out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0);
+               out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
                out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
        }
 }
_

Patches currently in -mm which might be from b34...@freescale.com are

origin.patch

_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable

Reply via email to