This is a note to let you know that I've just added the patch titled
Revert "serial/8250_pci: setup-quirk workaround for the kt serial
controller"
to the 3.3-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-serial-8250_pci-setup-quirk-workaround-for-the-kt-serial-controller.patch
and it can be found in the queue-3.3 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 49b532f96fda23663f8be35593d1c1372c0f91e0 Mon Sep 17 00:00:00 2001
From: Dan Williams <[email protected]>
Date: Fri, 6 Apr 2012 11:49:44 -0700
Subject: Revert "serial/8250_pci: setup-quirk workaround for the kt serial
controller"
From: Dan Williams <[email protected]>
commit 49b532f96fda23663f8be35593d1c1372c0f91e0 upstream.
This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7.
The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race
condition in the kt serial's iir register if the only source of
interrupts is THRE (fifo-empty) events. An modem status event at the
wrong time can again cause an iir read to drop the 'empty' status
leading to a hang. So, revert this in preparation for using the
existing "I don't trust my iir register" workaround in the 8250 core
(UART_BUG_THRE).
Acked-by: Alan Cox <[email protected]>
Cc: Sudhakar Mamillapalli <[email protected]>
Reported-by: Nhan H Mai <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250.c | 4 +---
drivers/tty/serial/8250/8250_pci.c | 17 +----------------
include/linux/serial_core.h | 1 -
3 files changed, 2 insertions(+), 20 deletions(-)
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1592,13 +1592,11 @@ static irqreturn_t serial8250_interrupt(
do {
struct uart_8250_port *up;
struct uart_port *port;
- bool skip;
up = list_entry(l, struct uart_8250_port, list);
port = &up->port;
- skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
- if (!skip && port->handle_irq(port)) {
+ if (port->handle_irq(port)) {
handled = 1;
end = NULL;
} else if (end == NULL)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1092,14 +1092,6 @@ static int skip_tx_en_setup(struct seria
return pci_default_setup(priv, board, port, idx);
}
-static int kt_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_port *port, int idx)
-{
- port->flags |= UPF_IIR_ONCE;
- return skip_tx_en_setup(priv, board, port, idx);
-}
-
static int pci_eg20t_init(struct pci_dev *dev)
{
#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
@@ -1118,6 +1110,7 @@ pci_xr17c154_setup(struct serial_private
return pci_default_setup(priv, board, port, idx);
}
+/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
@@ -1147,7 +1140,6 @@ pci_xr17c154_setup(struct serial_private
#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
-#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1232,13 +1224,6 @@ static struct pci_serial_quirk pci_seria
.subdevice = PCI_ANY_ID,
.setup = ce4100_serial_setup,
},
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = kt_serial_setup,
- },
/*
* ITE
*/
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -355,7 +355,6 @@ struct uart_port {
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
-#define UPF_IIR_ONCE ((__force upf_t) (1 << 26))
/* The exact UART type is known and should not be probed. */
#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
Patches currently in stable-queue which might be from [email protected]
are
queue-3.3/serial-8250_pci-add-a-force-background-timer-flag-and-use-it-for-the-kt-serial-port.patch
queue-3.3/revert-serial-8250_pci-init-quirk-msi-support-for-kt-serial-controller.patch
queue-3.3/revert-serial-8250_pci-setup-quirk-workaround-for-the-kt-serial-controller.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
