This is a note to let you know that I've just added the patch titled
ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ata-sata_rcar-disable-dipm-mode-for-r8a7790-es1.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From aa1cf25887099bba68f1f3879c0d394e08b8779f Mon Sep 17 00:00:00 2001
From: Simon Horman <[email protected]>
Date: Mon, 27 Oct 2014 09:14:30 +0900
Subject: ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
From: Simon Horman <[email protected]>
commit aa1cf25887099bba68f1f3879c0d394e08b8779f upstream.
Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car
controller needs to be run with DIPM disabled.
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/ata/sata_rcar.txt | 3 ++-
drivers/ata/sata_rcar.c | 10 ++++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -3,7 +3,8 @@
Required properties:
- compatible : should contain one of the following:
- "renesas,sata-r8a7779" for R-Car H1
- - "renesas,sata-r8a7790" for R-Car H2
+ - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+ - "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_R8A7790_ES1_SATA,
};
struct sata_rcar_priv {
@@ -763,6 +764,9 @@ static void sata_rcar_setup_port(struct
ap->udma_mask = ATA_UDMA6;
ap->flags |= ATA_FLAG_SATA;
+ if (priv->type == RCAR_R8A7790_ES1_SATA)
+ ap->flags |= ATA_FLAG_NO_DIPM;
+
ioaddr->cmd_addr = base + SDATA_REG;
ioaddr->ctl_addr = base + SSDEVCON_REG;
ioaddr->scr_addr = base + SCRSSTS_REG;
@@ -792,6 +796,7 @@ static void sata_rcar_init_controller(st
sata_rcar_gen1_phy_init(priv);
break;
case RCAR_GEN2_SATA:
+ case RCAR_R8A7790_ES1_SATA:
sata_rcar_gen2_phy_init(priv);
break;
default:
@@ -838,6 +843,10 @@ static struct of_device_id sata_rcar_mat
.data = (void *)RCAR_GEN2_SATA
},
{
+ .compatible = "renesas,sata-r8a7790-es1",
+ .data = (void *)RCAR_R8A7790_ES1_SATA
+ },
+ {
.compatible = "renesas,sata-r8a7791",
.data = (void *)RCAR_GEN2_SATA
},
@@ -849,6 +858,7 @@ static const struct platform_device_id s
{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
{ "sata-r8a7779", RCAR_GEN1_SATA },
{ "sata-r8a7790", RCAR_GEN2_SATA },
+ { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA },
{ "sata-r8a7791", RCAR_GEN2_SATA },
{ },
};
Patches currently in stable-queue which might be from
[email protected] are
queue-3.14/ata-sata_rcar-disable-dipm-mode-for-r8a7790-es1.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
