commit: e21093ef6fb4cbecdf926102286dbe280ae965db From: Ira W. Snyder <[email protected]> Date: Tue, 11 Sep 2012 15:58:15 -0700 Subject: can: janz-ican3: fix support for older hardware revisions
The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable <[email protected]> Signed-off-by: Ira W. Snyder <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> --- drivers/net/can/janz-ican3.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 98ee438..7edadee 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id) */ static int ican3_reset_module(struct ican3_dev *mod) { - u8 val = 1 << mod->num; unsigned long start; u8 runold, runnew; @@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod) runold = ioread8(mod->dpm + TARGET_RUNNING); /* reset the module */ - iowrite8(val, &mod->ctrl->reset_assert); - iowrite8(val, &mod->ctrl->reset_deassert); + iowrite8(0x00, &mod->dpmctrl->hwreset); /* wait until the module has finished resetting and is running */ start = jiffies; -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
