于 2012年12月13日 21:27, Steffen Trumtrar 写道: > With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" > the > mainline mxs-uart driver now sets RTSEN only when hardware flow control is > enabled via software. It is not possible any longer to set RTS manually via > software. However, the manual modification is a valid operation. > Regain the possibility to set RTS via software and only set RTSEN when > hardware > flow control is explicitly enabled via settermios cflag CRTSCTS. > > Signed-off-by: Steffen Trumtrar <[email protected]> > --- > drivers/tty/serial/mxs-auart.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c > index 6db23b0..9f63f88 100644 > --- a/drivers/tty/serial/mxs-auart.c > +++ b/drivers/tty/serial/mxs-auart.c > @@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, > unsigned mctrl) > > u32 ctrl = readl(u->membase + AUART_CTRL2); > > - ctrl &= ~AUART_CTRL2_RTSEN; > + ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); > if (mctrl & TIOCM_RTS) { > if (tty_port_cts_enabled(&u->state->port)) > ctrl |= AUART_CTRL2_RTSEN; > + else > + ctrl |= AUART_CTRL2_RTS; > } > > s->ctrl = mctrl; Reviewed-by: Huang Shijie <[email protected]>
-- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
