This is a note to let you know that I've just added the patch titled

    tg3: Fix deadlock in tg3_change_mtu()

to the 3.13-stable tree which can be found at:
    
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tg3-fix-deadlock-in-tg3_change_mtu.patch
and it can be found in the queue-3.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.


>From foo@baz Thu Feb 27 20:11:26 PST 2014
From: Nithin Sujir <[email protected]>
Date: Thu, 6 Feb 2014 14:13:05 -0800
Subject: tg3: Fix deadlock in tg3_change_mtu()

From: Nithin Sujir <[email protected]>

[ Upstream commit c6993dfd7db9b0c6b7ca7503a56fda9236a4710f ]

Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together.  When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared.  This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.

netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."

tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().

Reported-by: David Vrabel <[email protected]>
Tested-by: David Vrabel <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Nithin Nayak Sujir <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/net/ethernet/broadcom/tg3.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -13965,12 +13965,12 @@ static int tg3_change_mtu(struct net_dev
 
        tg3_netif_stop(tp);
 
+       tg3_set_mtu(dev, tp, new_mtu);
+
        tg3_full_lock(tp, 1);
 
        tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 
-       tg3_set_mtu(dev, tp, new_mtu);
-
        /* Reset PHY, otherwise the read DMA engine will be in a mode that
         * breaks all requests to 256 bytes.
         */


Patches currently in stable-queue which might be from [email protected] are

queue-3.13/tg3-fix-deadlock-in-tg3_change_mtu.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to