If you have the minitower, then the battery is held onto the motherboard with velcro. The battery is behind the I/O cage, in the upper right hand corner, looking into the left side of the tower. You have to ease the motherboard out the rear, taking care not to loosen any cables, until you see the battery. It takes some firm pulling/wiggling on the battery to break the velcro seal. Make sure you observe the orientation of the battery connector. Can't tell you about the desktop model in detail, but from what I hear, the battery is hidden at the same spot on the motherboard in that config as well.
Jim ----- Original Message ----- From: "Phil Andrus" <[EMAIL PROTECTED]>> Subject: PRAM battery > I bought a battery for my 3000/240 several months ago, but I haven't > installed it. Why? Because both times I've had the hood open, once > to install a Sonnet card and once to install a cd burner, I couldn't > find a battery to replace. > Honest. Anyone want to point me in the right direction? > > Thanks, > > Phil > -- StarMax is sponsored by <http://lowendmac.com/> and... / Buy books, CDs, videos, and more from Amazon.com \ / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \ Support Low End Mac <http://lowendmac.com/lists/support.html> StarMax list info: <http://lowendmac.com/lists/starmax.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/starmax%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
