For the media changer I defined three drives starting at address 1,
one robot arm at address 16, ten tape slots starting at 1024, and five
import/export elements at address 32.
However, when I use mtx for the status (mtx -f /dev/sg4 status) I get:
Storage Changer /dev/sg4:3 Drives, 13 Slots ( 5 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag =
ABC123
Data Transfer Element 1:Empty
Data Transfer Element 2:Empty
Storage Element 1:Empty:VolumeTag=
Storage Element 2:Full :VolumeTag=ULT001L3
Storage Element 3:Empty:VolumeTag=
Storage Element 4:Empty:VolumeTag=
Storage Element 5:Empty:VolumeTag=
Storage Element 6:Empty:VolumeTag=
Storage Element 7:Empty:VolumeTag=
Storage Element 8:Empty:VolumeTag=
Storage Element 9
IMPORT/EXPORT:Empty:VolumeTag=
Storage Element 10
IMPORT/EXPORT:Empty:VolumeTag=
Storage Element 11
IMPORT/EXPORT:Empty:VolumeTag=
Storage Element 12
IMPORT/EXPORT:Empty:VolumeTag=
Storage Element 13 IMPORT/EXPORT:Empty:VolumeTag=
Why doesn't show mtx the proper addresses as defined at setup,
i.e. first storage element -> 1024?
Thanks,
Albert
_______________________________________________
Stgt-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/stgt-devel
