In reply to the question about how to split field stone of 12 to 16 inches
diameter (300mm to 400mm) to build a landscape wall the following may or
may not be useful.

If at all possible lay the rounded stones as they are, they can be very
attractive with their natural shapes, mosses/lichens etc. Dry walls up to
say 5 feet (1.5 metres) can be built quite successfully with rounded stones
as long as their length is laid into the thickness of the wall. Rounded
stones with a 'bite' or coarse surface, like granite are best. Lay the
largest stones at the base of the wall where they look best followed by
medium sized and finally smaller stones.

In mortared walls, rounded stones are often split to achieve a flush joint
to the face of the wall. If a flush joint is attempted with rounded stones
the face of the stones are partly hidden behind the mortar. This is alright
if the wall is to be rendered but not so attractive for finished work. The
answer is to recess the mortar joints but this can sometimes be impractical.
Vernacular buildings in Ireland built of rounded stones often display
occassional bands of flat thin stones every 2 feet (600mm) or so as a
control mechanism to prevent collapse. Smaller stones or pinnings are
essential in the wider mortared joints. Mortars traditionally were hot lime
(quicklime and coarse sand).

Finally, to split stones of 12 inches to 16 inches, plugs and feathers, an
old Roman technology are best. For such small stones plugs and feathers of
say 6 inches in lenght (150mm) or even 4 inches (100mm) are ample. A handy
diameter is three quarters of an inch (20mm). This diameter will suit an
easily obtainable masonry bit size. The drill can be heavy duty, hammer
action worked on electricity. Compressed air is best but not really
warranted for work on this scale. A series of holes about 6 inches apart and
in a straight line are drilled around the stone. These stones will only
require 2 to 4 for each stone.Two metal feathers with a metal plug between
are dropped in each hole and tapped rather lightly to prevent damaging them.
Often you can hear the stone splitting before you can see it. Pitch off the
new face of the stone to get rid of the drill holes using a tungsten tipped
pitcher. A punch, if neccessary can be used to remove the remaining traces
on the face of each stone. There is a wall in County Down built of rounded
field stone, split with plugs and feathers, 20 miles long, over 6 feet high
and 3 feet thick at the base. It also climbs 15 mountains. So there are
plenty of examples about.

Lastly there are more crude methods of breaking rather than splitting
rounded stones using a sledge. With hard stones this can be quite dangerous
and wasteful.

Regards,
Patrick McAfee



....................................................................
Learning Stone is hosted free by Spunge.org (http://www.spunge.org).
For list info + help, including subscribe/unsubscribe options,
email message "intro stone" to [EMAIL PROTECTED]


Reply via email to