At 06:08 PM 8/30/99 +0900, Craig Vachon wrote:

>Can anyone advise me on how to keep these expensive tools from
>breaking?  (I only strike the chisel with the hammer once for every ten
>seconds - and always move the chisel from the last place struck...)

Granite is a hard material. In the old days in the U.S. (80 to 120 years
ago, before carbide tools) standard work rules in the granite shops called
for one blacksmith for every four granite cutters- which meant one cutter
would use up as many chisels in 8 hours as a blacksmith could sharpen in 2
hours. 

A couple friends worked on the carving some large Indians designed by Frank
Lloyd Wright (the carving was done in the early 1980's; these pieces were
for the Johnson Wax building, they were in the original plan but were never
executed until 18 years ago.). The figures were around 12 or 15 feet tall.
They went through as many as 20 carbide tools in a day; filled buckets with
tools that went back to the manufacturer for re-tipping. 


____________________________________
Walter S. Arnold  * [EMAIL PROTECTED] 
Gallery:        http://www.stonecarver.com
NT Fax: http://www.ntfax-faq.com
Gargoyle postcards: http://www.stonecarver.com/postcard.html



............................................................
To get list info + help, including subscribe/unsubscribe
options, email message "intro stone" to [EMAIL PROTECTED]
or visit http://www.learningstone.net/lsemlist.htm


Reply via email to