hello Don

I live around Montr�al...
Even if I'm not expert at all, I will try to help you a bit.  I visited a 
big shop lately where granit was cut by a cable on which whwere glued some 
diamond dust. Two huge wheels, acting as pulleys, served to drive the cable 
ans they where about 16 feet apart.  A mechanism ( either hydraulic or worm 
gear ?) could raise parallaly these pulleys about five feet about the 
ground, once used in the opposite way down, it could feed the cable .  Thus, 
in between  wheels and under the cable one could place a huge block a any 
type of material.  Water was used as a coolant directly on the crack made 
all the way being cut.

I have been in this shop because, exactly like you, i needed a boulder being 
sliced.  The boss refused because he had too much slicing ahead to do.
I am planing to visit some other factories to find someone who will agree.

So as far as I am concern, if you ever need infos about the company who 
build these "band saw" i could find it for you...

Good luck

denis Plante

----Original Message Follows----
> From: "Don Meister, Omega-3 Fisheries"
Date: Wed, 30 Aug 2000 17:08:12 -0600

> I am primarily interested in knowing how to slice some of these
> boulders.  The stones are almost all far too large to be sliced with a
> diamond saw (besides diamond blades being far too expensive for me) but
> I've heard of a method using wire cable for stone cutting.20
> 
> I would very much like to hear from someone who has knowledge or
> experience with slicing granite in the sizes I have available.  Shaping
> will come later, but the slicing is the essential first step.



............................................
For subscribe, unsubscribe, digest, archive
and other options, consult our FAQ at
http://www.learningstone.net/lslstfaq.html


Reply via email to