Hello, I am using a SuperMicro X7DCA-3 motherboard: http://www.supermicro.com/products/motherboard/Xeon1333/5100/X7DCA-3.cfm
I have 4 desktop SATA hard drives attached through the LSI 1068E SAS port, and one hard drive connected through the normal SATA port. OpenSolaris detects the SATA hard drive however I can't seem to get the SAS hard drives to get noticed. I see no option in the BIOS to do anything with the SAS controller, however there is a RAID software screen that I can look at when it boots up (by hitting ctrl-M). I am thinking that its possible that this RAID software is disabling the hard drives until it gets set up. Clearly however I don't want to set up any manner of RAID through this, but I dont see any option to enable the drives and turn RAID off. Has anyone used this LSI 1068E SAS controller before? And if so what steps did you take to make it function? -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
