Peter, I see from the archives that someone had a similar problem five years ago - but I do not see a resolution. Do you recall if a solution was found then? https://www.stunnel.org/pipermail/stunnel-users/2011-August/003185.html
Stephen ---------- Peter, Apologies for not including the log info earlier. No, the stunnel log only show that it is binding the service pop3s to the static ip address of the server on port 995. It does not connect to port 110. Excuse my naivety - but should the pop3 service (Gnu-pop3d) be running on 110 at the same time as stunnel as it is not being called in the stunnel.conf exec line? I have tried it either way and the result is the same. Here is the message log which is slightly more verbose than the stunnel log: Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: stunnel 5.35 on x86_64-unknown-linux-gnu platform Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: Compiled/running with OpenSSL 1.0.2h 3 May 2016 Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[cron]: Cron thread initialized Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: errno: (*__errno_location ()) Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: UTF-8 byte order mark not detected Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: FIPS mode disabled Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Compression enabled: 1 method(s) Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Snagged 64 random bytes from /dev/urandom Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: PRNG seeded successfully Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Initializing service [pop3s] Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Private key check succeeded Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: DH initialization Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Could not load DH parameters from /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[ui]: Using dynamic DH parameters Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: ECDH initialization Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: ECDH initialized with curve prime256v1 Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: SSL options: 0x03004004 (+0x03004000, -0x00000000) Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[ui]: Configuration successful Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Listening file descriptor created (FD=7) Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Option SO_REUSEADDR set on accept socket Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Service [pop3s] (FD=7) bound to 60.59.114.106:995 Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG6[cron]: Executing cron jobs Aug 18 11:40:30 oracle stunnel: LOG5[ui]: Compiled/running with OpenSSL 1.0.2h 3 May 2016 Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG5[cron]: Updating DH parameters Aug 18 11:40:30 oracle stunnel: 2016.08.18 11:40:30 LOG7[ui]: Created pid file /usr/local/var/lib/stunnel/var/run/stunnel.pid Aug 18 11:40:30 oracle stunnel: LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI Aug 18 11:40:30 oracle stunnel: LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf Aug 18 11:40:30 oracle stunnel: LOG5[ui]: UTF-8 byte order mark not detected Aug 18 11:40:30 oracle stunnel: LOG5[ui]: FIPS mode disabled Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Compression enabled: 1 method(s) Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Initializing service [pop3s] Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem Aug 18 11:40:30 oracle stunnel: LOG6[ui]: Using dynamic DH parameters Aug 18 11:40:30 oracle stunnel: LOG5[ui]: Configuration successful Aug 18 11:40:30 oracle stunnel: LOG6[cron]: Executing cron jobs Aug 18 11:40:30 oracle stunnel: LOG5[cron]: Updating DH parameters Aug 18 11:40:39 oracle stunnel: LOG5[cron]: DH parameters updated Aug 18 11:40:39 oracle stunnel: 2016.08.18 11:40:39 LOG5[cron]: DH parameters updated Aug 18 11:40:39 oracle stunnel: 2016.08.18 11:40:39 LOG6[cron]: Cron jobs completed in 9 seconds Aug 18 11:40:39 oracle stunnel: 2016.08.18 11:40:39 LOG7[cron]: Waiting 86391 seconds Aug 18 11:40:39 oracle stunnel: LOG6[cron]: Cron jobs completed in 9 seconds Aug 18 11:42:00 oracle systemd: stunnel.service: Start operation timed out. Terminating. Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Found 1 ready file descriptor(s) Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: FD=4 events=0x2001 revents=0x1 Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: FD=7 events=0x2001 revents=0x0 Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Dispatching signals from the signal pipe Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Processing SIGNAL_TERMINATE Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG5[ui]: Terminated Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Closing service [pop3s] Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Service [pop3s] closed (FD=7) Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: Service [pop3s] closed Aug 18 11:42:00 oracle stunnel: 2016.08.18 11:42:00 LOG7[ui]: removing pid file /usr/local/var/lib/stunnel/var/run/stunnel.pid Aug 18 11:42:00 oracle audit: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=stunnel comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' Aug 18 11:42:00 oracle systemd: Failed to start SSL tunnel for network daemons. Aug 18 11:42:00 oracle systemd: stunnel.service: Unit entered failed state. Aug 18 11:42:00 oracle systemd: stunnel.service: Failed with result 'timeout'. Aug 18 11:42:00 oracle stunnel: LOG5[ui]: Terminated On Thu, 2016-08-18 at 11:34 +0300, Peter Pentchev wrote: > > On Wed, Aug 17, 2016 at 07:29:23PM -0400, SP wrote: > > > > > > On Thu, 2016-08-18 at 01:04 +0300, Peter Pentchev wrote: > > > > > > > > > On Wed, Aug 17, 2016 at 04:37:12PM -0400, SP wrote: > > > > > > > > > > > > > > > > Summary of problem (configuration and log details below): > > > > I am attempting to configure Stunnel to run a pop3s service on > > > > our > > > > server so that users can retrieve email securely. > > > > Stunnel is started as a systemctl service. If I include both > > > > the > > > > following in the stunnel.conf: > > > > > > > > accept = mail.myserver.net:995 > > > > connect = localhost:110 > > > > > > > > then systemctl will exit immediately with: > > > > Service [pop3s]: Each service must define two endpoints > > > > stunnel.service: Control process exited, code=exited status=1 > > > > Failed to start SSL tunnel for network daemons. > > > > > > > > If I comment the connect to 110 then it will start and hang > > > > then > > > > eventually timeout: > > > > stunnel.service: Failed with result 'timeout'. > > > Try uncommenting the "connect" line, then commenting out the > > > "exec" > > > and > > > "execargs" lines; see if this helps. As it is, you're telling > > > stunnel > > > "listen on port 995, then connect to port 110 and also run a > > > program"; > > > that's three things, and it wants you to tell it exactly two. > > > > > > It's a different question why the "exec" one doesn't work > > > though... > > > In the current configuration, with the "connect" line commented > > > out > > > and > > > the "exec" and "execargs" one uncommented, when you connect to > > > port > > > 995, > > > can you see (with "pstree -l" or "ps awwfux" or something like > > > that) > > > stunnel starting a gnu-pop3d process? Does the gnu-pop3d process > > > log > > > something somewhere? > > Peter, > > > > Thank you for your reply. Commenting out the exec and execargs > > does > > dispense with the "requires two endpoints" fault. The programs > > still > > times out, however with the program and systemctl exiting. > OK, so does the stunnel log show that it is accepting your > connection? > Does the stunnel log show that it is connecting to port 110? > Does the log of the program that you have listening on port 110 show > that it is accepting stunnel's connection to it? > > G'luck, > Peter _______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users