Hello, I am trying to use the xvncviewer on Ubuntu by VNC over stunnel, it will connect failed and print "xvncviewer: read: Connection reset by peer". The LOG on VNC server is here:
2012.01.01 00:21:58 LOG7[1]: Initializing application specific data for session authenticated 2012.01.01 00:21:58 LOG7[1]: SNI: no virtual services defined 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS read client hello 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS write server hello 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS write certificate 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS write key exchange 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS write certificate request 2012.01.01 00:21:58 LOG7[1]: TLS state (accept): SSLv3/TLS write server done 2012.01.01 00:21:58 LOG7[1]: TLS alert (read): fatal: internal error 2012.01.01 00:21:58 LOG3[1]: SSL_accept: ssl/record/rec_layer_s3.c:1584: error:0A000438:SSL routines::tlsv1 alert internal error 2012.01.01 00:21:58 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2012.01.01 00:21:58 LOG7[1]: Deallocating application specific data for session connect address 2012.01.01 00:21:58 LOG7[1]: Local descriptor (FD=3) closed 2012.01.01 00:21:58 LOG7[1]: Service [vnc] finished (0 left) I am running Stunnel 5.63 Here is the configuration currently: stunnel.conf on VNC client: cert = /home/server.pem key = /home/privkey.pem [VNC] client = yes accept = 127.0.0.1:5901 connect = 172.31.100.121:5901 sslVersion = all verifyChain = yes CAfile = /home/server.pem checkIP = 172.31.100.121 stunnel.conf on VNC server: cert = /conf/server.pem ;key = /conf/certs/privkey.pem setuid = stunnel4 setgid = stunnel4 pid = /var/run/stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 socket = a:TCP_NODELAY=1 debug = 7 foreground = yes client = no ciphers=AES256-SHA256:!RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM sslVersion = TLSv1.2 [vnc] accept = :::5901 connect = 5900 verify = 3 CAfile = /conf/server.pem Is this something I can remedy from the configuration, or is this something that requires modification? Thank you Johan _______________________________________________ stunnel-users mailing list -- stunnel-users@stunnel.org To unsubscribe send an email to stunnel-users-le...@stunnel.org
