Robert, I took the patch with tiny cleanups as it looked sane to me, but I think I the last couple of days have shown that you are much better than me in spotting issues in that code :-)
Would you please take a look? Willem is leaving tonight and I want to make sure we get this figured out in the next 12 hours or so. Thanks /D On Mon, Oct 13, 2014 at 10:24:36PM +0200, Willem Ferguson wrote: > CCR patch. Reorganise the oxygen partial pressure calculations. > > This patch responds to the side effects that the CCR code has had with > respect to ceilings in OC dives and dive plans. Dive ceilings are now > calculated apparently correctly. The following were performed: > 1) remove the oxygen sensor and setpoint fields from the gas_pressures > structure. > 2) Re-insert setpoint and oxygen sensor fields in the plot_data structure. > 3) Remove the algorithm that reads the o2 sensor data and calculates the > pressures.po2 > value from function fill_pressures() in dive.c and save it as a separate > function > calc_ccr_po2() in profile.c. > 4) Activate calc_ccr_po2 from function fill_pressures() in profile.c. > 5) Move the relative position of the call to fill_pressures() within the > function create_polt_info_new() in profile.c. > > Signed-off-by: willem ferguson <willemfergu...@zoology.up.ac.za> _______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
