Hi All, >>/Am 21.01.2017 um 13:28 schrieb Rick Walsh <rickmwalsh at gmail.com <http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface>>: />>//>>/set the switch depth of the deco gas to either deeper than the max depth of the dive (so you never switch to it), or very shallow (0.1m, so it has negligible effect on the plan). / >Alternatively, you first plan the dive with all gases, save and then re-edit >the dive in planner, where you delete a cylinder. For the next cylinder, "save >a copy" and then re-edit the original dive again.
I'm also using the "set 'Deco switch at' to 99m" workaround. Nevertheless I vote for the (small) "Use this gas" checkbox at the left side of every table row. This would make life easier and from my point of view lost gas considerations are an important feature. Best regards Stefan -- Stefan Fuchs Banzhaldenstr. 66 70469 Stuttgart E-Mail: sfu...@gmx.de <mailto:sfu...@gmx.de>
_______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
