On 17 November 2017 at 19:10, Anton Lundin <gla...@acc.umu.se> wrote: > On 17 November, 2017 - Davide DB wrote: > >> Looking to one of my CCR dives (Petrel 2 controller) I realized that >> Po2 values reported by Subsurface at the 6 meter stop are way higher >> than those recorded and displayed by Shearwater Desktop. >> I'm 100 sure that Shearwater Desktop shows correct values because I >> perfectly remember O2 values I was seeing at 6 meter: I was never >> never never over 1.6 for all the time. >> According to Subsurface profile I was all the time at 6m over 1.6 with >> spikes at 1.75. >> Am I missing something? >> >> I chose a point in time (122' 50")and I attach three screenshots: >> >> Shearwater (which display only the AVG pO2) >> Subsurface with single pO2 sensor display >> Subsurface with AVG pO2 sensor display > > Could you dump the raw data from the device? > > It can be done using either dctool or using the predator protocol and > creating a device dump. > > > You could probably just send a log file of the download, I think I still > got the tool to replay a log file as a download. > > > Then I can take a look at the raw data to try to figure out what's going > on. > > > //Anton
After depleting one battery here are. Dctool is a lucky process. 99% of the times I get errors like this: [73.192176] ERROR: Failed to receive the response packet. [in ../../source/src/shearwater_common.c:319 (shearwater_common_transfer)] [73.192715] ERROR: Failed to download the dive. [in ../../source/src/shearwater_petrel.c:266 (shearwater_petrel_device_foreach)] [73.193107] ERROR: Error downloading the dives. [in ../../source/examples/dctool_download.c:218 (download)] [73.193712] INFO: Write: size=9, data=FF0105002E902000C0 Raw file for the dive attached Thanks a lot -- Davide https://vimeo.com/bocio/videos
dive.0001.bin
Description: Binary data
_______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
