On 2019/04/17 23:11, Doug Junkins wrote:
On Apr 17, 2019, at 1:47 PM, Willem Ferguson <willemfergu...@zoology.up.ac.za>
wrote:
On 2019/04/17 21:04, Doug Junkins wrote:
It is not clear to me why atmospheric pressure and dive mode were chosen as
special fields that get added to the location label on the Notes tab as opposed
to other fields like water and air temperature. Are those really the most
important fields for the majority of Subsurface users to be treated uniquely?
They are two critical values for interpretation of the ceiling in the dive
profile and therefore play an important rôle in assessing the safety of a dive.
Temperature is not (well, unless you are diving at very low temperature). It is
an attempt to maximise the ability information of the display to provide
information relating to the safety of the dive.
I am not sure the Location label should be overloaded to display these other
fields, to be honest.
If you have an alternative suggestion of where to display this information,
please bring this up. That is the purpose of this discussion. We must assume
there will be different points of view but are trying to get a consensus that
accommodates as many as possible of the different types of divers that use
Subsurface. Makes sense?
That does makes sense. My thought is that if those two values are critical to
creating a safe dive profile, then they should both be included in the dive
profile title. In the second screenshot, you show the dive mode in the title as
“GF 45/70 (Open Circuit)”. Could you instead include both the atmospheric
pressure and the dive mode in the profile title like “GF 45/70 (Open Circuit,
980 bar surface pressure)” to keep the information where it is most relevant,
instead of overloading the label for the dive location? For users that do not
have the surface pressure populated in the dive planner or from their computer,
the second part of the profile title could be eliminated.
-Doug
.
Two points:
1) Barometric pressure is in principle a location-specific measure,
dependent on the way air pressure systems move around. Two dive sites
100 km apart are unlikely to have exactly the same barometric pressure.
2) The usual recreational diver will never get a display of barometric
pressure. This is because it is only shown if there is a valid pressure
value that has been either recorded by the dive computer or specified by
the diver. Those with dive computers that record barometric pressure are
probably interested to see the pressure because it affects the way that
oxygen sensor(s) of that dive computer are calibrated and it also
reflects the way the dive computer calculates dive ceilings internally.
Kind regards,
willem
--
This message and attachments are subject to a disclaimer.
Please refer to
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full
details.
_______________________________________________
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface