When adding a dive by hand, one should be able to edit the dive profile
on the profile panel as described in section 5.1.1 of the user manual.
This currently does not happen. In fact it appears there are two bugs:
1) See attached image. The default profile of 15m for 45 minutes shows a
crazy profile that is not useful to anybody. The descent rate to 15m
should be in the order of 20m/min, NOT 15m/22min. Similarly the default
ascent rate should be around 10m/min. The profile should have a square
shape, not a triangular shape.
2) The normal red cross-haired cursor and the white points on the
vertices of the profile are gone so that the default profile cannot be
edited on the profile panel. See section 5.1.1 in user manual.
Kind regards,
willem
--
This message and attachments are subject to a disclaimer.
Please refer to
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full
details.
_______________________________________________
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface