That's odd and shouldn't be possible. Are you sure you actually downloaded the dive with 5.0.7 and it wasn't downloaded from the dive computer with a previous version and then just displayed with 5.0.7?
With 5.0.7 and 5.0.8 on OC you should get "ZH-L16" and "Saturation 77, Desaturation 78". And CCR you should get "ZH-L16-GF" and "GF 40/80". With older versions, and current master, you should get "ZH-L16-GF" and "GF 40/80". Anyway, the bug is fixed so future versions should get the right information in either case. /Michael On Thursday 28 April 2022 22:07:37 CEST Martin Gröger wrote: > hm... > > interesting, 'cause I dive OC and the extra info says > "ZHL16" and "GF40/80" as my ostc is set > (subsurface 5.0.7 /hwos 3.17) > > > > ________________________________ > From: h...@ruin.nu <h...@ruin.nu> on behalf of Michael Andreen <h...@ruin.nu> > Sent: Thursday, April 28, 2022 7:19:55 PM > To: Martin Gröger <martingroe...@hotmail.com>; Subsurface Mailing List > <subsurface@subsurface-divelog.org>; JB2Cool <jb2c...@gmail.com> > Subject: Re: OSTC extra info (deco model and deco model info) not downloading > correctly in newer Subsurface releases (5.0.7 and 5.0.8) > > I don't have access to the screenshot, but it shouldn't be related to the > OSTC firmware. The core problem was a bad merge between changes to the OSTC > parser in Jef's master branch and the Subsurface specific additions in the > Subsurface-DS9 branch. In short the dive mode (e.g. OC or CCR) got mixed up > with deco model (old ostc buhlman or gradient factors). If Martin is diving > CCR then he would get gradient factors in the log, while anyone diving OC > would get the old deco model (with hardcoded saturation and desaturation > parameters). > > /Michael > > On Thursday 28 April 2022 18:48:14 CEST JB2Cool via subsurface wrote: > > Martin, > > What OSTC firmware are you using? I wonder if you'll see this if you > > upgrade to 3.18 i think that's when i started seeing this, > > > > Jason > > > > On Thu, 28 Apr 2022 at 17:32, Martin Gröger <martingroe...@hotmail.com> > > wrote: > > > > > Hm… > > > > > > I can’t confirm that issue (see screen) > > > data downloaded subsurface desktop 5.07/OSTC plus > > > deco model & gf all ok > > > > > > Keep on howling > > > > > > grey > > > > > > > > > > > > *Von: *JB2Cool via subsurface <subsurface@subsurface-divelog.org> > > > *Gesendet: *Montag, 4. April 2022 10:22 > > > *An: *Subsurface Mailing List <subsurface@subsurface-divelog.org> > > > *Betreff: *Re: OSTC extra info (deco model and deco model info) not > > > downloading correctly in newer Subsurface releases (5.0.7 and 5.0.8) > > > > > > > > > > > > Someone replied over at the Heinrichs Weikamp forum ( > > > https://forum.heinrichsweikamp.com/viewtopic.php?p=23678#p23678) saying > > > that it looks like libdivecomputer is using the wrong memory addresses for > > > this information (this was correct previously). A pull request ( > > > https://github.com/subsurface/libdc/pull/32) has been generated that > > > hopefully reverts this. > > > > > > > > > > > > I'll try to build locally with those adjustments and see if this > > > straightens things out for me. > > > > > > > > > > > > Jason > > > > > > > > > > > > On Sun, 3 Apr 2022 at 20:33, JB2Cool <jb2c...@gmail.com> wrote: > > > > > > Good evening, > > > > > > I’ve downloaded some dives today and realised the 'extra info' on my OSTC > > > is not downloading correctly. I originally reported this to Heinrichs > > > Weikamp here (https://forum.heinrichsweikamp.com/viewtopic.php?t=22302) > > > as these were the first dives I’ve done on this new OSTC firmware but > > > subsequent troubleshooting makes this look like the issue is at the > > > Subsurface or libdivecomputer end. > > > > > > > > > > > > I’ve downloaded some older AppImages and this works fine on 5.0.5 and > > > 5.0.6 but shows the undesirable behaviour on 5.0.7 and 5.0.8. > > > > > > > > > > > > Extra info on dives with older versions of Subsurface look like: > > > > > > > > > > > > FW Version 3.17 > > > Deco model ZH-L16-GF > > > Deco model info GF 30/85 > > > > > > Now with the newest 2 versions of Subsurface extra info looks like: > > > > > > FW Version 3.18 > > > Deco model ZH-L16 > > > Deco model info Saturation 77, Desaturation 78 > > > > > > It’s still doing this for dives that have downloaded fine in the past > > > where I know the dive was completed with the gradient factor model. This > > > only seems to affect newly downloaded dives, if something was downloaded > > > correctly in the past on a ‘good’ version then it will still display > > > correctly on a ‘bad’ version but if you were to download the dive again on > > > a ‘bad’ version then the issue would present itself (I may not be making > > > myself clear here). > > > > > > > > > > > > I've hopefully captured the relevant logs/dumps that will help with > > > troubleshooting. > > > > > > > > > > > > If I can provide screenshots or more information I'm of course happy to do > > > that. > > > > > > > > > > > > Regards > > > > > > Jason > > > > > > > > > > > > > _______________________________________________ subsurface mailing list subsurface@subsurface-divelog.org http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
