Dear Fereshteh,
can you provide your test shape file? When you first load a network in
netedit, the junctions are not fully computed. Press F5 to compute all
links.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: Re: [sumo-user] incorrect street directions from shp to sumo.net
Datum: 2024-02-29T14:08:57+0100
Von: "fereshte jafari" <j.fereshte1...@gmail.com>
An: "Mirko Barthauer" <m.bartha...@t-online.de>
Dear Mirko,
Please see attached my typefile which does not include the oneway option.
Also, I attached three pictures of a specific link in my network in 1-shp,
2-sumo, 3-netedit. As you can see in the pictures in shp the DIR_TRAVEL=B
while in sumo and netedit it shows just one direction on the link.
Besides that, I have one more question. My links in netedit are not
connected completely as you can see in the attached screenshot while in the
sumo they are well connected and there is no warning. I am wondering if
this situation would be ok or problematic in next steps of simulation
runnings? Because my network is very large and fixing these issues one by
one is really timetaking. I prefer to skip it 😬
Thanks in advance for your help.
On Thu, Feb 29, 2024 at 7:26 AM Mirko Barthauer <m.bartha...@t-online.de
<mailto:m.bartha...@t-online.de> > wrote:
Dear Feresteh,
the only case this may happen when looking at the code is related to the
type definitions you added. If the type has the attribute oneway="true",
this overrides the value from the shape file. If this does not explain
your problems, please provide a test file.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: [sumo-user] incorrect street directions from shp to
<http://sumo.net>
Datum: 2024-02-28T17:41:24+0100
Von: "fereshte jafari via sumo-user" <sumo-user@eclipse.org
<mailto:sumo-user@eclipse.org> >
An: "Sumo project User discussions" <sumo-user@eclipse.org
<mailto:sumo-user@eclipse.org> >
Hello!
I converted my shapefile to a sumo network using the below command
netconvert --shapefile-prefix roads4 --shapefile.use-defaults-on-failure
--speed-in-kmh t --type-files osmNetconvert4.typ -v
the generated network does not contain the road directions properly
although this attribute already exists in my shapefile with the name
DIR_TRAVEL which is given in the table of this documentation (Direction
of travel ("B": both, "F": forward, "T": backward)).
<https://sumo.dlr.de/docs/Networks/Import/ArcView.html>
In most cases, the directions are correct but bidirectional roads only
work in one direction!
Your guidance and help would be greatly appreciated.
--
Sincerely,
Fereshteh Jafari Shahdani
PhD candidate, Dep. of Civil Engineering
ISISE - University of Minho
--
Sincerely,
Fereshteh Jafari Shahdani
PhD candidate, Dep. of Civil Engineering
ISISE - University of Minho
_______________________________________________
sumo-user mailing list
sumo-user@eclipse.org
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
