Thanks for your response. What about the warnings of the roundabouts? Do you confirm removing this roundabout and recreating it as explained here (Converting an intersection into a roundabout)? https://sumo.dlr.de/docs/Netedit/neteditUsageExamples.html
warnings: Warning: Found sharp turn with radius 7.94 at the start of edge '-23537059'. Warning: Found sharp turn with radius 8.65 at the end of edge '-23537059'. Warning: Found sharp turn with radius 8.26 at the start of edge '1149894368'. Warning: Found sharp turn with radius 7.71 at the end of edge '1149894370'. Warning: Found sharp turn with radius 8.65 at the start of edge '23537059'. Warning: Found sharp turn with radius 7.94 at the end of edge '23537059'. Warning: Found sharp turn with radius 6.36 at the end of edge '859481424'. Warning: Found sharp turn with radius 4.04 at the start of edge '893710466'. Regards, Fereshteh On Wed, Mar 6, 2024 at 2:31 PM Mirko Barthauer <m.bartha...@t-online.de> wrote: > I cannot see the connections but those messages may be normal, as by > default netconvert <https://sumo.dlr.de/docs/netconvert.html#junctions> > will reduce the allowed speed inside intersections depending on the > curvature. Please look at the options *--junctions.limit-turn-speed *and > *--junctions.limit-turn-speed.min-angle*. > > > > Best regards > > Mirko > > > > > > > > > > -----Original-Nachricht----- > > Betreff: [sumo-user] Resolve network warnings > > Datum: 2024-03-06T14:49:47+0100 > > Von: "fereshte jafari via sumo-user" <sumo-user@eclipse.org> > > An: "Sumo project User discussions" <sumo-user@eclipse.org> > > > > > > > Hello! > > I am facing many warnings in my network. Several of them related to a > roundabout as shown in the picture below: > [image: Screenshot 2024-03-06 at 13.36.47.png] > I am thinking about removing this roundabout and recreating it as > explained here (Converting an intersection into a roundabout): > https://sumo.dlr.de/docs/Netedit/neteditUsageExamples.html But I am not > sure if it is the best solution. > > Beside that, I also have the below warnings: > Warning: Speed of straight connection '-604070588_1->-33040725_1' reduced > by 7.28 due to turning radius of 20.06 (length=7.15, angle=36.28). > Warning: Speed of straight connection '33040725_0->604070588_0' reduced by > 5.53 due to turning radius of 27.30 (length=9.84, angle=36.28). > Warning: Speed of straight connection '33040725_1->604070588_1' reduced by > 6.14 due to turning radius of 24.65 (length=8.86, angle=36.28). > Warning: Speed of straight connection '713933105_1->604070587_1' reduced > by 6.08 due to turning radius of 24.89 (length=11.41, angle=42.13). > Warning: Speed of straight connection '-604070587_0->-713933105_0' reduced > by 7.63 due to turning radius of 18.73 (length=8.49, angle=42.13). > > By clicking on them it does not go to the warning place on the network and > I have no idea on how to get rid of them. > > Any ideas and suggestions would be appreciated. > > > -- > *Sincerely,* > *Fereshteh Jafari Shahdani* > *PhD candidate, Dep. of Civil Engineering* > *ISISE - University of Minho* > > > > -- *Sincerely,* *Fereshteh Jafari Shahdani* *PhD candidate, Dep. of Civil Engineering* *ISISE - University of Minho*
_______________________________________________ sumo-user mailing list sumo-user@eclipse.org To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user