Dear Soheil,
the vehicle type change is persistent. If you want to switch back, you need
another Calibrator. The Calibrator updates the speed limit if defined with
a speed value and creates vehicles with the referenced route starting at
the calibrator location. Then these vehicles then will follow the route to
the destination.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: Re: [sumo-user] changing car-following parameters for links
Datum: 2024-03-20T19:00:59+0100
Von: "Soheil Keshavarz" <[email protected]>
An: "Mirko Barthauer" <[email protected]>
Thank you for your reply, Mirko.
Regarding this solution, will the vehicles have the new type when they exit
the selected edge? or will they have their default type (defined in the
route file for each vehicle) when not on a calibrated edge?
Some other questions about calibrators:
When we use speed calibrators, will that change the speed limit of selected
edges or will that change the flow in a way that the average speed matches
the speed in the calibrator?
When calibrating the flow and in case of not having enough flow, will the
calibrator only create flow for the selected route, and new trips will
start and end at both ends of the route? Or new trips will be sampled from
actual OD pairs whose trips will pass the selected route?
Thanks again for your help,
Best,
Soheil
On Wed, Mar 20, 2024 at 1:29 AM Mirko Barthauer <[email protected]
<mailto:[email protected]> > wrote:
Dear Soheil, you can use Calibrator items to make vehicles change their
vehicle type at a defined location. This would get you the desired
effect. Best regards Mirko -----Original-Nachricht----- Betreff:
[sumo-user] changing car-following parameters
ZjQcmQRYFpfptBannerStart
This Message Is From an Untrusted Sender
You have not previously corresponded with this sender.
See<https://itconnect.uw.edu/email-tags> for additional information.
Please contact the UW-IT Service Center, [email protected]
<mailto:[email protected]> 206.221.5000, for assistance.
ZjQcmQRYFpfptBannerEnd
Dear Soheil,
you can use Calibrator items
<https://urldefense.com/v3/__https://sumo.dlr.de/docs/Simulation/Calibrator.html*calibrating_vehicle_types__;Iw!!K-Hz7m0Vt54!nCgrumNs82Q5obu0jrrpIWjdHWeIpDwxhnWdzefrXX6iQtNzCZO6FwJCfgehQPGUJFMhEU43HmLL32gI6qoCM46WLA$>
to make vehicles change their vehicle type at a defined location. This
would get you the desired effect.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: [sumo-user] changing car-following parameters for links
Datum: 2024-03-20T08:56:09+0100
Von: "Soheil Keshavarz via sumo-user" <[email protected]
<mailto:[email protected]> >
An: "Sumo project User discussions" <[email protected]
<mailto:[email protected]> >
Dear all,
I have a network that includes multiple road types, from small streets to
highways therefore I need to implement the car-following parameters in an
edge-wise manner. Currently, those parameters are set in my route file as
properties of vehicles and are consistent throughout the trip regardless
of the road type the vehicles are on. Can anyone let me know if it's
possible to make vehicles change their behavior during the trip based on
the edge they are on?
Thank you,
Soheil
--
SOHEIL KESHAVARZ (he/him)
Graduate Student | Research Assistant at iUTS Lab
<https://depts.washington.edu/iuts/wordpress/>
[email protected] <mailto:[email protected]> / <http://washington.edu/>
More Hall 110
_______________________________________________
sumo-user mailing list
[email protected]
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/sumo-user
