Thank you for reporting this issue. It has been fixed in the latest development version [24863]. Note, that only consecutive lanes are allowed so your input example now results in a corresponding error message. For neighboring lanes you will need to define 2 detectors. regards, Jakob
2017-06-23 7:12 GMT+02:00 Matthias Wirtz <[email protected]>: > Hi, > > when using e2detectors which strech out over more than one lane SUMO keeps > crashing during loading of the simulation. > > My definition of the detector looks like this: > > <e2Detector id="e2Detector_gneE2_0_0" lanes="gneE2_0 gneE2_1" pos="1030.0" > endPos="1040.0" freq="60.00" file="e2Detector_gneE2.txt" > timeThreshold="1.00" speedThreshold="1.00" jamThreshold="10.00"/> > > When using the detector only for one lane SUMO can load the simulation > just fine. Is there any issue with the configuration of the detector? > > Minimal example attached. > > I'm using SUMO 0.30 on linux. > > Regards. > > -- > Matthias > -- > Matthias Wirtz, Mannheim, DE > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
