Hello,
I use the following nod. , edg. and tll. xml files in order to define my
network (this is a small part of my network, only 3 nodes). The road segment is
a two-way road consisting of 3 lanes each. In the second node I have a light
traffic. I realised that in order not to get an error I had to define the light
traffic states with 8 letters (8 possible directions). Is this a default case
for sumo? What if I had in real, only 6 directions? Do I have to define this
somewhere in the xml files?
P.S. This occurs only with the two-way roads. In case of an one direction road
the number of the required letters in the states of light traffic is equal to
the number of lanes.
Thanks
Natalia
<nodes>
<node id="1" x="22.970728" y="40.574811" z="0.7"/>
<node id="2" x="22.96996" y="40.57629" z="0.7" type="traffic_light"/>
<node id="3" x="22.9697" y="40.5769" z="0.7”/>
</nodes>
<edges>
<edge id="1" from="1" to="2" numLanes="3"/>
<edge id="1i" from="2" to="1" numLanes="3"/>
<edge id="2" from="2" to="3" numLanes="3"/>
<edge id="2i" from="3" to="2" numLanes="3”/>
</edges>
<additional>
<tlLogic id="2" type="static" programID="0" offset="0">
<phase duration="20" state="GGGGGGGG"/>
<phase duration="5" state="yyyyyyyy"/>
<phase duration="20" state="rrrrrrrr"/>
<phase duration="5" state="yyyyyyyy"/>
</tlLogic>
</additional>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sumo-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sumo-user
